問い合わせ
問い合わせ 在庫確認

パワーマグネティクス | はじめに

Standex ElectronicsグループのATC-Frost Magnetics 社は、低周波(50/60Hz~400Hzの範囲)、高周波(20KHz~RFの範囲)、パワーインダクター、コモンモードチョークといったあらゆるニーズに対応する幅広い標準パワーマグネティクスおよびカスタムパワーマグネティクスを提供しています。電源トランスは、一次電圧を二次電圧レベルに変換する(下げる、上げる、または主電圧と同じレベルに変換する)ために選択されます。回路インピーダンスの整合については、ほとんどあるいは全く考慮しなくても構いません。ATC-Frost Magnetics社は、磁束を集中させ、高度な誘導結合をもたらすために、すべての電源トランスを高品質の電気絶縁型スチールコアに巻き付けています。これは、業界最小の表面実装トロイダル(環状体)パワーチップインダクターです。トロイダル(環状体)コモンモードチョークは、標準製品の製品群から要求される正確な値を使って指定することができ、ベースの有無にかかわらず、垂直または水平に取り付けて構成することができます。標準設計またはカスタム設計の品質は、業界をリードしている当社の環境・電気試験研究所で立証することができます。これらの製品のほとんどは、UL/CSAの認証を受けているか、UL/CSA/VDE規格の要件を満たすように設計されています。また、必要に応じて認証機関の承認を獲得しています。当社の卓越した社内機能(スタンピング、モールド成形、巻線、および終端)によって、標準的な製品をカスタマイズしたり、新しい設計をゼロから作り始めることができます。Standex Electronicsは、基本的なトランスコイルから付加価値のあるアセンブリに至るまで、目標や予算に応じたパワーマグネティクスのカスタムソリューションを設計しています。「CUSTOM IS STANDARD(カスタムを当たり前に)」が合言葉です。Standex Electronicsの平面型トランス、スコット(T)結線トランス、電源、電流検出器、およびカスタム電子部品は、医療、軍事、航空宇宙分野の設計エンジニアからの信頼を獲得しています。Standex Electronics Magnetics Brands

製品パンフレット- マグネティクス

General purpose TLE TLB FPT Series Low Voltage Lighting power transformers with secondary protection and double insulation are suitable for low voltage lighting circuits. Dielectric strength tested to CSA/UL standards. Enclosed models include secondary circuit protection. Toroid models are supplied with necessary mounting hardware. Custom sizes, ratings and terminations may be engineered for your specific application. Some models CSA certified to TIL-B45 as suitable for use with “trapeze lighting systems”.

TA-TAE-FPT Series Auto power transformers are line frequency magnetics designed in an open, enclosed package with an economical method of changing voltage levels. These auto transformers are widely used to operate electrical equipment outside of North America. Typically 50% smaller than similar isolation transformers. All models are 50/60Hz, 230V-115V or 115V -230V. Laminated units are varnished impregnated for quiet operation with 10″ leads standard. Some models CSA / UL recognized LR16597, E105782. Class B – 130°C insulation system utilized. Dielectric standards to CSA/UL standards. Custom sizes, ratings and terminations may be engineered for your specific application.

FPS Series Class 2 power transformers energy-limiting wall plug line frequency magnetic transformer with output voltage limited to meet the requirements for connection to Class 2 circuits as defined in the electrical code plugs into any North American standard duplex receptacle CSA (NRTL/C) certified to C22.2 No. 223-M91 and UL 1310. Rugged, high-impact, flame retardant thermoplastic enclosure with secondary screw terminals hidden and protected from accidental shorting. Also available with flexible secondary line cord and jacks for special applications. The fail-safe protection designed into the transformer allows the use of lightweight, unprotected “bell” wiring in applications such as door chimes, buzzers, intercoms, security devices, thermostats, central vacuum systems, low voltage lighting control, remote control, etc.

FTA Series Class 2 power transformers energy-limiting cord connected line frequency magnetic transformer with output voltage limited to meet the requirements for connection to Class 2 circuits as defined in the electrical code CSA (NRTL/C) certified to C22.2 No. 223-M91.

Fully certified CA Series Class 2 power transformers are line frequency magnetics featuring a highly isolated, wired-in high impact resistant plastic case that requires no extra grounding. Available in 120V 60Hz primary models or 240V 50/60Hz primary models. Combination screw / .25″ male quick connect secondary terminals with integrated 1/2″ conduit nipple mounting and optional panel mount bracket available. Fuse-less energy limiting winding. CSA and UL approved models available. Custom sizes, ratings and terminations may be engineered for your specific application.

FPT Series Power Toroidal Transformers offers 44 standard models from 15VA to 500 VA. Dual 115/230V 50/60Hz rated primary and dual secondaries for series or parallel selection with class B 130°C insulation system utilized. Low radiated magnetic field. CSA and UL recognized components LR16597, E105782. Dielectric tested to UL/CSA standards. Custom sizes, ratings and terminations may be engineered for your specific application. ATC-Frost UL / CSA family recognition assures fast, trouble free approval of your equipment. Toroidal transformer designs are typically 50% lighter and much more compact than traditional EI laminated transformers. Custom toroid transformer dimensions may be varied to accommodate alternate dimensional requirements such as low profile or slim line equipment. Low stray magnetic fields compared to traditional EI laminated transformers. Low noise – toroidal construction ensures that mechanical hum” will be minimal.

TRPH Series Horizontal Split Bobbin Power Transformers are line frequency magnetics designed for printed circuit board (PCB) mounting. Split bobbin construction provides for high isolation primary to secondary, low capacitive to minimize line noise, and require no electrostatic shield. Single 115V or dual 115/230V primaries. Split secondaries allow series, parallel or dual operation. CSA certified LR15697 and UL recognized E107872. Class B – 130°C insulation system. Custom sizes, ratings and terminations may be engineered for your specific application.

TRP-TRPD Series Low Voltage Rectifier Power Transformers are line frequency magnetics designed for printed circuit board (PCB) vertical mounting (TRP series is 6 pin and TRPD series is 8 pin). 0.5VA to 24VA single or dual primary voltages. 6 Pin 230 Volt 50/60Hz also available. CSA and UL recognized LR16597, E105782. Class B – 130°C insulation system. Custom sizes, ratings and terminations may be engineered for your specific application.

TRPL Series Power Transformers are line frequency magnetics designed for printed circuit board (PCB) mounting and have low inter-winding capacitance and require no electro-static shield due to separated windings. Dual Primaries 115/230V, 50/60Hz and 2.5VA to48 VA. Industry standard P.C. pin layout. CSA Certified LR 16597; UL recognized E105782. Ideal for solid state control and instrumentation as well as sing or dual output D.C. supplies. Custom sizes, ratings and terminations may be engineered for your specific application.

TRPI Series Low Voltage Rectifier Power Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted package with 2.5VA to 56VA and 4000VRMS isolation primary and secondary. Industry standard P.C. board layout. Dual primary/secondary windings for series/parallel operation. CSA/UL recognized components. Custom sizes, ratings and terminations may be engineered for your specific application.

TRC Series Low Voltage Rectifier Transformers are line frequency magnetics designed in a chassis mount package – open style. CSA certified LR 16597 and UL recognized E105782. Conservative Class A operation with economical channel frame mounting. Split/dual bobbin operation. All secondaries center tapped Class B – 130°C insulation system used. Custom sizes, ratings and terminations may be engineered for your specific application.

TRB Series Low Voltage Rectifier Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted – open style package. CSA certified LR 16597 and UL recognized E105782. Insulated 10″ TEW primary and secondary leads. Secondary winding center tapped. Custom sizes, ratings and terminations may be engineered for your specific application.

TAP Series Telecomm Transformers are audio matching telecommunications line frequency magnetics designed for PC board (PCB) mount and feature an economical open P.C. frame mounting with bifilar winding for capacitive and resistive balance. Frequency response 200Hz to 15KHz and insertion loss less than 1.5 dB. Dielectric tested for 250 VRMS. Custom epoxy cast unit available as well as custom sizes, ratings and terminations may be engineered for your specific application.

FTP Series Class 2 Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted package.  These transformers 2.5VA to 50 VA and dual primary voltage 115/230V 50/60 Hz. 400 VRMS dielectric strength tested. Bobbins and shroud meet UL94 VO rating. Most models use energy limiting fuse-less design. Split/dual bobbin construction provides for low capacitive coupling, minimizing noise. No electrostatic shield necessary. High isolation primary to secondary. Designed to meet CSA C22.2 No. 66 and UL1585. Custom sizes, ratings and terminations may be engineered for your specific application.

TRL Series Low Profile power transformer is a line frequency magnetic component designed in a horizontal core mounted for In chassis or on chassis mounting with color coded flexible wire leads. Dual primary 125/230V 50/60 Hz. CSA certified LR15697 and UL recognized E107872. Custom sizes, ratings and terminations may be engineered for your specific application.

TRE Series Low Voltage Rectifier power transformers are line frequency magnetics designed in bracket chassis mounted enclosed style and feature insulated 10″ TEW primary and secondary leads. CSA certified LR 16597 and UL recognized E105782. Secondary winding center tapped. Custom sizes, ratings and terminations may be engineered for your specific application.

10kW-30kW Planar Transformers Size 1100 Heatsink with 600A max current rating, frequency range 20-125kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

10kW-20kW Planar Transformers Size 900 Heatsink with 500A max current rating, frequency range 40-125kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

Load more

Other Magnetic Products

General purpose TLE TLB FPT Series Low Voltage Lighting power transformers with secondary protection and double insulation are suitable for low voltage lighting circuits. Dielectric strength tested to CSA/UL standards. Enclosed models include secondary circuit protection. Toroid models are supplied with necessary mounting hardware. Custom sizes, ratings and terminations may be engineered for your specific application. Some models CSA certified to TIL-B45 as suitable for use with “trapeze lighting systems”.

TA-TAE-FPT Series Auto power transformers are line frequency magnetics designed in an open, enclosed package with an economical method of changing voltage levels. These auto transformers are widely used to operate electrical equipment outside of North America. Typically 50% smaller than similar isolation transformers. All models are 50/60Hz, 230V-115V or 115V -230V. Laminated units are varnished impregnated for quiet operation with 10″ leads standard. Some models CSA / UL recognized LR16597, E105782. Class B – 130°C insulation system utilized. Dielectric standards to CSA/UL standards. Custom sizes, ratings and terminations may be engineered for your specific application.

FPS Series Class 2 power transformers energy-limiting wall plug line frequency magnetic transformer with output voltage limited to meet the requirements for connection to Class 2 circuits as defined in the electrical code plugs into any North American standard duplex receptacle CSA (NRTL/C) certified to C22.2 No. 223-M91 and UL 1310. Rugged, high-impact, flame retardant thermoplastic enclosure with secondary screw terminals hidden and protected from accidental shorting. Also available with flexible secondary line cord and jacks for special applications. The fail-safe protection designed into the transformer allows the use of lightweight, unprotected “bell” wiring in applications such as door chimes, buzzers, intercoms, security devices, thermostats, central vacuum systems, low voltage lighting control, remote control, etc.

FTA Series Class 2 power transformers energy-limiting cord connected line frequency magnetic transformer with output voltage limited to meet the requirements for connection to Class 2 circuits as defined in the electrical code CSA (NRTL/C) certified to C22.2 No. 223-M91.

Fully certified CA Series Class 2 power transformers are line frequency magnetics featuring a highly isolated, wired-in high impact resistant plastic case that requires no extra grounding. Available in 120V 60Hz primary models or 240V 50/60Hz primary models. Combination screw / .25″ male quick connect secondary terminals with integrated 1/2″ conduit nipple mounting and optional panel mount bracket available. Fuse-less energy limiting winding. CSA and UL approved models available. Custom sizes, ratings and terminations may be engineered for your specific application.

FPT Series Power Toroidal Transformers offers 44 standard models from 15VA to 500 VA. Dual 115/230V 50/60Hz rated primary and dual secondaries for series or parallel selection with class B 130°C insulation system utilized. Low radiated magnetic field. CSA and UL recognized components LR16597, E105782. Dielectric tested to UL/CSA standards. Custom sizes, ratings and terminations may be engineered for your specific application. ATC-Frost UL / CSA family recognition assures fast, trouble free approval of your equipment. Toroidal transformer designs are typically 50% lighter and much more compact than traditional EI laminated transformers. Custom toroid transformer dimensions may be varied to accommodate alternate dimensional requirements such as low profile or slim line equipment. Low stray magnetic fields compared to traditional EI laminated transformers. Low noise – toroidal construction ensures that mechanical hum” will be minimal.

TRPH Series Horizontal Split Bobbin Power Transformers are line frequency magnetics designed for printed circuit board (PCB) mounting. Split bobbin construction provides for high isolation primary to secondary, low capacitive to minimize line noise, and require no electrostatic shield. Single 115V or dual 115/230V primaries. Split secondaries allow series, parallel or dual operation. CSA certified LR15697 and UL recognized E107872. Class B – 130°C insulation system. Custom sizes, ratings and terminations may be engineered for your specific application.

TRP-TRPD Series Low Voltage Rectifier Power Transformers are line frequency magnetics designed for printed circuit board (PCB) vertical mounting (TRP series is 6 pin and TRPD series is 8 pin). 0.5VA to 24VA single or dual primary voltages. 6 Pin 230 Volt 50/60Hz also available. CSA and UL recognized LR16597, E105782. Class B – 130°C insulation system. Custom sizes, ratings and terminations may be engineered for your specific application.

TRPL Series Power Transformers are line frequency magnetics designed for printed circuit board (PCB) mounting and have low inter-winding capacitance and require no electro-static shield due to separated windings. Dual Primaries 115/230V, 50/60Hz and 2.5VA to48 VA. Industry standard P.C. pin layout. CSA Certified LR 16597; UL recognized E105782. Ideal for solid state control and instrumentation as well as sing or dual output D.C. supplies. Custom sizes, ratings and terminations may be engineered for your specific application.

TRPI Series Low Voltage Rectifier Power Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted package with 2.5VA to 56VA and 4000VRMS isolation primary and secondary. Industry standard P.C. board layout. Dual primary/secondary windings for series/parallel operation. CSA/UL recognized components. Custom sizes, ratings and terminations may be engineered for your specific application.

TRC Series Low Voltage Rectifier Transformers are line frequency magnetics designed in a chassis mount package – open style. CSA certified LR 16597 and UL recognized E105782. Conservative Class A operation with economical channel frame mounting. Split/dual bobbin operation. All secondaries center tapped Class B – 130°C insulation system used. Custom sizes, ratings and terminations may be engineered for your specific application.

TRB Series Low Voltage Rectifier Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted – open style package. CSA certified LR 16597 and UL recognized E105782. Insulated 10″ TEW primary and secondary leads. Secondary winding center tapped. Custom sizes, ratings and terminations may be engineered for your specific application.

TAP Series Telecomm Transformers are audio matching telecommunications line frequency magnetics designed for PC board (PCB) mount and feature an economical open P.C. frame mounting with bifilar winding for capacitive and resistive balance. Frequency response 200Hz to 15KHz and insertion loss less than 1.5 dB. Dielectric tested for 250 VRMS. Custom epoxy cast unit available as well as custom sizes, ratings and terminations may be engineered for your specific application.

FTP Series Class 2 Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted package.  These transformers 2.5VA to 50 VA and dual primary voltage 115/230V 50/60 Hz. 400 VRMS dielectric strength tested. Bobbins and shroud meet UL94 VO rating. Most models use energy limiting fuse-less design. Split/dual bobbin construction provides for low capacitive coupling, minimizing noise. No electrostatic shield necessary. High isolation primary to secondary. Designed to meet CSA C22.2 No. 66 and UL1585. Custom sizes, ratings and terminations may be engineered for your specific application.

TRL Series Low Profile power transformer is a line frequency magnetic component designed in a horizontal core mounted for In chassis or on chassis mounting with color coded flexible wire leads. Dual primary 125/230V 50/60 Hz. CSA certified LR15697 and UL recognized E107872. Custom sizes, ratings and terminations may be engineered for your specific application.

TRE Series Low Voltage Rectifier power transformers are line frequency magnetics designed in bracket chassis mounted enclosed style and feature insulated 10″ TEW primary and secondary leads. CSA certified LR 16597 and UL recognized E105782. Secondary winding center tapped. Custom sizes, ratings and terminations may be engineered for your specific application.

TRCQ Series Low Voltage Rectifier power transformers are line frequency magnetics designed for channel chassis mounting – open style with combination – solder or quick connect terminals. Split bobbin construction provides for high isolation primary to secondary, low capacitive to minimize line noise, and require no electrostatic shield. Center tapped secondary winding. CSA certified LR15697 and UL recognized E107872. Class B – 130°C insulation system. Custom sizes, ratings and terminations may be engineered for your specific application.

TRCI-TRBI Series Low Voltage Rectifier power transformers are line frequency magnetics designed in a a bracket chassis mount package and feature a high isolation dual bobbin (UL 94VO) construction that is 4000 V RMS dielectric tested. 25VA to 175VA. CSA certified LR15697 and UL recognized E107872. Class B – 130°C insulation system and designed to meet international standards. Dual primary and secondary windings. Custom sizes, ratings and terminations may be engineered for your specific application.

TCE Series Control Circuit power transformers are line frequency magnetics with enclosed chassis mounting to allow mounting of control circuit transformers outside of any other electrical enclosure and for coil protection. Access knockouts for cable are integrally provided. Attractive ASA61 grey enamel cover. Size reduced enclosures available. Fully varnish impregnated for quite operation. CSA-NRTL/C certified KR16597. 100VA to 1000VA. Custom sizes, ratings and terminations may be engineered for your specific application.

TCC-TCK Series Control Circuit power transformers are line frequency magnetics designed in a channel frame mounted package. The most economical transformer style that provides voltage changes from distribution to control levels, and have isolated primary and secondary windings. UL CSA recognized – LR 16597, E105782 and class B – 130°C insulation system utilized. 8″ to 10″ flexible leads standard, custom terminations available as well as custom sizes, ratings and terminations may be engineered for your specific application.

TC Series Control Circuit power transformers are line frequency magnetics featuring a traditional heavy duty four-point bracket chassis mounting and binding head screw terminals. UL CSA recognized – LR 16597, E105782. Multiple primary and secondary voltage combinations available. Varnish impregnated and baked for quiet operation. Custom sizes, ratings and terminations may be engineered for your specific application.

FTC-FTD-FTK Series Class 2 power transformers are line frequency magnetics chassis mount designed packaged used in low frequency applications.  These energy-limiting wired in transformer featuring a rugged all steel construction providing excellent heat dissipation and electromagnetic shielding. Fully threaded steel conduit nipple provides strong positive mounting. Secondary wiring terminals available in combination screw / .25″ male quick connects. Vacuum varnish impregnated and oven baked to insure quiet trouble free operation. Most models are Custom sizes, ratings and terminations may be engineered for your specific application.

CHC Series Chokes are line frequency magnetics designed in a channel bracket mounted chassis for low frequencies with inductance to 30 henries – current to 10 amps. Termination via 8″ leads – other lead lengths optional. CSA certified LR 16597-50 for designs up to 70 Amps and 600 Volts. Vacuum varnish impregnated and oven baked for quiet operating. Custom sizes, ratings and terminations may be engineered for your specific application.

CHB Series Reactors are line frequency magnetics designed in an L’ bracket mounted chassis with inductance to 100 millihenries – current to 50 amps. Termination via screw terminals. CSA certified LR 16597-50 for designs up to 70 Amps and 600 Volts. Vacuum varnish impregnated and oven baked for quiet operating. Custom sizes, ratings and terminations may be engineered for your specific application.

SJ / SU Series High Frequency Toroidal Power Inductor packaged in a surface mount design (SMD) is ideal where space and weight are critical and surface mount is required. When used as power inductors, they may be connected for higher current lower inductance or lower current higher inductance. When used as 1:1 transformers (coupled inductors) they provide electrical isolation. May be manufactured with economical powdered iron cores or higher performance low loss cores. Other core materials available for a variety of applications and custom sizes and values may be engineered for your specific application.

CM Series High/Low Frequency Toroidal Common Mode Choke for EMI/RFI applications is designed for common mode noise up to 30 MHz on A.C. and D.C lines. Build your own standard part number to give exactly the value you require, within an economical family of standard core sizes. Available configured vertically or horizontally, with or without a base. Custom sizes and values may be engineered for your specific application.

CI CJ Series High Frequency Toroidal Differential Mode Power Inductor used for switching power supply, EMI/RFI filter and other applications that require low radiated emissions. CI series inductors are designed primarily for switching power supply applications up to 75 KHz. CJ series power inductors are designed primarily for higher frequency switching power supply applications from 50 to 500 Khz. Build your own standard part number to give exactly the value you require, within an economical family of standard core sizes. Available configured horizontally or vertically, with or without a base. Custom sizes and values may be engineered for your specific application.

すべてのパワーマグネティクス

Mil Spec Magnetics

Standex Electronics is experienced in providing "flight" assembled mil spec magnetics such as power transformers, Scott T transformers, and switching regulator inductors that are manufactured to the most stringent quality standards then proven in an industry leading environmental and electronic test lab. We have experience manufacturing to stringent quality standards - like Mil-Std 202, Mil-Std 981, Mil-PRF 27, NASA standard NHB 8739.3, AS9100, and ITAR. Military and aerospace design engineers trust Standex Electronics for planar transformers, Scott-T transformers, power supplies and custom electronic components. When failure is not an option - Trust Standex Electronics!

Input Scott T Transformers synchro to resolver converter transformers are precision manufactured primarily for military and aerospace applications. Three-wire synchro angle data from the input to a Scott T transformer which isolates them from converter ground and translates them into two signals – the amplitudes being proportionate to the sine and cos. Contact Standex Electronics for your custom variation, engineered for your specific application.

2mH Switching Regulator Inductors featuring a completely encapsulated construction. Threaded mounting insert for additional mounting strength. Custom sizes and values may be engineered for your specific application.

10mH switching regulator inductors designed to meet the requirements of Mil-PRF 287, 288 and 289, featuring a completely encapsulated construction. Double winding styles available for more current capacity. Center hole for mounting. Custom sizes and values may be engineered for your specific application.

400 Hz Power Transformers 1.5 VA to 9 VA are miniature encapsulated toroidal transformers designed to meet the requirements of Mil-PRF-27/37 through /47. 308 standard designs from 1.5VA through 25 VA. A wide variety of output voltages offer maximum design flexibility. Contact Standex Electronics for your custom variation, engineered for your specific application.

プレーナーマグネティクス

Standex Electronicsのプレーナーマグネティクスには、平面型トランスと平面型インダクターが含まれています。これらは、様々な標準コア サイズで使用することができ、カスタム構成を備えています。ますます多くの業界が小型化とともに高効率化と高性能化への追い風を感じ始めるにつれて、巻線型トランスの代替品として平面型トランスが注目を集めています。平面型トランスは、特定のアプリケーションの「スイート スポット(注力分野)」に最適です。このソリューションは、今日のアプリケーションにとって非常に理にかなっています。優れたエンジニアリングと平面トランスを組み合わせると、スペース、時間、コストを節約できるだけでなく、ニーズをユニークかつ具体的な形で満たすソリューションを手に入れることができます。当社はお客様の「アプリケーション エンジニアリング エキスパート」です。以下を含むそのユニークな利点については、「プレーナーマグネティクスの設計ガイドブック」をご覧ください。
・優れた熱管理を実現する特許取得済み(米国特許第7,129,809号)のヘッダーおよび端末(米国特許第7,460,002号)
・フェライト コアの底面と放熱基板との間で直接接触伝熱が行われています。
・温度制御された基板/ヒートシンクに取り付けることができます。
・両側の端子の共平面性が安定しており、正確です。
・はんだ付け性に優れています。
・直接接触コア バックウォールが平面なため、熱伝導率が大幅に向上しており、EMIが低減しています。
・ 柔軟で低インピーダンスの終端です。
・冷却用気流なしで作動します。
・最低8mmの空間距離と沿面距離に適合します。

製品パンフレット- プレーナーマグネティクス

10kW-30kW Planar Transformers Size 1100 Heatsink with 600A max current rating, frequency range 20-125kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

10kW-20kW Planar Transformers Size 900 Heatsink with 500A max current rating, frequency range 40-125kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

10kW-20kW Planar Transformers Size 900 with 500A max current rating, frequency range 40-125kHZ. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

3kW-10kW Planar Transformers Size 560 Heatsink with 400A max current rating, frequency range 40-125kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

3kW-10kW Planar Transformers Size 560 with 400A max current rating, frequency range 40-125kHZ. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

2kW-6kW Planar Transformers Size 350 Heatsink with 300A max current rating, frequency range 40-150kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

2kW-6kW Planar Transformers Size 350 with 300A max current rating, frequency range 40-150kHZ . Patented (U.S. Patent 7,460,002) terminals offer mechanical strength and very low resistance. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals. Various terminal options available (SMD, Thru-hole, screw terminals).

1kW-3kW Planar Transformers Size 220 Heatsink with 250A max current rating, frequency range 60-200kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals.

1kW-3kW Planar Transformers Size 220 with 250A max current rating, frequency range 60-200kHZ . Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals.

300W-1.2kW Planar Transformers Size 135 Heatsink with 100A max current rating, frequency range 100-250kHZ are packaged in anodized aluminum heatsinks offering high thermal conductivity and removing heat from windings. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals.

300W-1.2kW Planar Transformers Size 135 with 100A max current rating, frequency range 100-250kHZ . Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull. High efficiency (low losses), ultra compact, low-profile. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs. Large secondary pins reduce temperature rise on terminals.

150W-700W Planar Transformers Size 110 with 60A max current rating, frequency range 100-250kHZ. Patented (U.S. PAT. 7,129,809) design with superior thermal management. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull, Flyback. High efficiency (low losses), ultra compact, low-profile. Great co-planarity of terminals due to patented header offering repeatable height. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs.

100W-500W Planar Transformers Size 075 with 50A max current rating, frequency range 150-300kHZ. Patented (U.S. PAT. 7,129,809) design with superior thermal management. Topologies include Full Bridge, Half Bridge, Full Bridge ZVS, Push-Pull, Flyback. High efficiency (low losses), ultra compact, low-profile. Great co-planarity of terminals due to patented header offering repeatable height. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs.

50W-200W Planar Transformers Size 055 with 50A max current rating, frequency range 175-300kHZ. Patented (U.S. PAT. 7,129,809) design with superior thermal management. Topologies include Half Bridge, Forward (w/active rest), Flyback. High efficiency (low losses), ultra compact, low-profile. Great co-planarity of terminals due to patented header offering repeatable height. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs.

20W-150W Planar Transformers Size 035 with 30A max current rating, frequency range 200-400kHZ. Patented (U.S. PAT. 7,129,809) design with superior thermal management. Topologies include Half Bridge, Forward (w/active rest), Flyback. High efficiency (low losses), ultra compact, low-profile. Great co-planarity of terminals due to patented header offering repeatable height. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs.

10W-50W Planar Transformers Size 025 with 20A max current rating, frequency range 300-500kHZ are available in surface mount (SMD) or through hole designs and forward (w/active rest), flyback topologies. Patented (U.S. PAT. 7,129,809) design with superior thermal management. High efficiency (low losses), ultra compact, low-profile. Great co-planarity of terminals due to patented header offering repeatable height. Excellent solderability (Pb-free or Pb/Sn Solder). Standard sizes / customer configurations, quick custom turn-around often without start-up or tooling costs.

PQ32 Series Planar Inductors are fixed power inductors w/ferrite core available in surface mount (SMT) or through hole tab (THT) mounting style. Used in switching power supplies, DC/DC converters, FPGA and low/high profile current, high current POL converters, feedback control, overload sensing, load drop and shut down detection.

カスタム磁気製品

設計エンジニアは、Standex Electronicsに依存して、トランス、インダクタおよびチョークなどのカスタム磁気製品および電子コンポーネントを提供しますが、アイデア、エンジニアリングの専門知識および支援も提供します。世界に拠点を広げるメーカーとして...

ニュースレターの申し込み

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials.

展示会&イベント

electronica China 2021
Booth No.: Booth 2550
For More Details, Click Here.

Follow Us

Focused. Leadership

Video
ダウンロード
Products compare