Contact Us
Contact Us Stock Check

Reed Switches and Dynamic Contact Resistance

DCR Test successive operations

“Dynamic contact resistance is a “true” test and a way of measuring the contact resistance of reed switches to ensure fault free operation, and maximum switching efficiency.”

If there are particular areas you need help with, feel free to skip to any of the following sections:
Introduction
What is a Dynamic Contact Resistance Test?
What DCR Test Failures Look Like
Dynamic Contact Resistance Test Factors
Conclusion
Additional Resources

Introduction

Reed switches simplify the process of energy transfer through a product or system, but there is much more to a reed switch than what meets the unfamiliar eye. The complexity of the act of “switching” itself and the number of factors that can impact the functionality of a reed switch are key concepts to understand. The health and function of a reed switch is a vital concern that has many threats, which is why Standex Electronics recommends dynamic contact resistance testing.

DCR test circuit for reed switch measurement

A typical circuit used for measuring the dynamic contact resistance across the contacts of a reed switch.

What is a Dynamic Contact Resistance Test?

Dynamic contact resistance is a “true” test and a way of measuring the contact resistance of the reed switch blades. This testing ensures that all tools being utilized are not adversely affecting the reed switch. Furthermore, the test eliminates premature failures and improves long term reliability in the equipment and technical systems.

Our typical dynamic contact resistance test consists of operating the reed contacts at about 100 times per second. At that rate, we look for a measurement of the contact resistance about 1 millisecond after the contacts close. If the contacts are clean (meaning no contaminants on the contacts) and the reed switch is intact, we usually get a positive result. However, if there is the slightest problem, the contact resistance will not have settled down within one millisecond timeframe. Resulting in a rejected or failed reed switch. A DCR test is the most accurate and efficient way to examine the condition and ability of the reed switch. Additionally, DCR testing helps to determine if anything needs to be corrected during the manufacture of reed switches. 

A good dynamic contact resistance test result

A typical or passing dynamic contact resistance test. The wave pattern shows the first closure, contact bounce, dynamic noise and pattern generated by wavering reed contacts.

Many things can prove to be a disruption in regards to a reed switch’s function. These disruptions listed below can cause a DCR failure:

  • Overstressed reed switch usually from assembly
  • Small crack on the reed seal
  • Broken reed switch
  • Plating or sputtering peeling off the contact area
  • Air contamination in the glass capsule
  • Particles on the reed contacts

What DCR Test Failures Look Like

Below are some examples of electrical patterns showing various DCR failures.

DCR Failure “Excessive Contact Bounce” indicating a weak contact closing force sure to shorten the life of the switch

DCR test showing excessive contact bounce

The electrical pattern of a DCR test showing a failure due to excessive contact bounce.

DCR Failure “Excessive Dynamic Noise” and “Excessive Contact Wavering” both caused by potential stressed or cracked glass switch seal

DCR test showing excessive dynamic noise

A failed dynamic contact resistance test showing excessive dynamic noise.

DCR test showing excessive contact wavering

A failed dynamic contact resistance test showing excessive contact wavering.

DCR Failure “Changing Contact Resistance” caused by contact contamination, seal leak, particles, or peeling plating

DCR test showing changing contact resistance

A failed dynamic contact resistance test showing contact resistance changing in each successive operation indicating contact contamination.

Dynamic Contact Resistance Test Factors

When completing a DCR test, there are a few different factors that will determine the approach of the test that is taken. For example, the test that you run and the results that you get will be based on the below five factors.

  1. Reed switch size
  2. The inductance of its coil
  3. Harmonic motion
  4. The voltage
  5. The overdrive level

Larger reed switches have more inertia and the reed blades are stiffer. This causes an increase in the initial reed closure time, the need for magnetically stronger, more inductive coil and the increase of the effects of the critically dampened harmonic motion. Conversely, smaller reed switches have less inertia, are more flexible, and subsequently will behave in the opposite manner of larger reed switches. Reed switch size and the successive inductance of its coil can have a major influence in the dynamic switching characteristics. When the reed contacts come together, they do so with a certain momentum that makes the reeds vibrate. Vibration that is referred to as critically dampening harmonic motion which is an important concept in DCR testing.

When the reeds undergo the critically damped harmonic motion, they are moving microscopically inside the glass capsule. The movement is occurring in the magnetic field generated by the coil and when the metal is in motion in the magnetic field a current will be induced in the metal. This current is a critical part of the measurement of DCR testing. The overdrive of the coil is also a critical parameter in making the DCR measurement. Essentially, it is the voltage (or current) above the actual pull-in (or closure point) where the DCR measurement is made.

Conclusion

Reed switches provide us with a unique ability to utilize opening and closing contacts in virtually any environment with a simple magnet, enabling a large space for switching innovation. Dynamic contact resistance testing is a must in order to ensure a fault free operation, maximum efficiency and continued reed switching innovation. For this reason, Standex Electronics DCR tests 100% of our reed-switch based components to ensure its customers get the highest quality and reliability.

Get in touch with our team to learn more about our carefully engineered solutions.

Additional Resources

For more information on how a reed switch is used with a permanent magnet download our Reed Technology Databook.

Reed Switch Technology Databook

This databook will provide a deep dive into what a reed switch is and how a reed switch works which include extensive examples of various applications, features, and benefits.

Request Information

Contact Us

SUBSCRIBE TO OUR NEWSLETTER

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials.

Tradeshows & Events

Follow Us

Focused. Leadership

Video
Download Table
Products compare