The MRE Reed Relay is a special series focused on High Voltage, High Current and High Insulation Resistance. This relay is capable of switching up to 1 kVDC, and, considering its compact size, it provides an extra high breakdown voltage of 7 kVDC (HV version) across the open contacts, or high carry current of 5 Amps (HC version).
This compact Dual-channel Dry-switch design uses two contacts in series or connected in parallel. Also, it features an integrated Magnetic Shield and high creepage distance pinout. As a result, you can expect High Insulation Resistance of 10 TOhm across open contacts as well as between coil and contacts, and thus a very Low Leakage Current in the picoamperes range.
Lastly, from reliable switching to long lifetime and Low Contact Resistance (ON-Resistance), the MRE relay series is ideally suited for ARC testers, precise testers, automated test equipment and medical equipment.
The BH Series is a High-Power Relay capable of switching up to 1 kVDC, while providing a breakdown voltage of 3 kVDC and higher across the open contacts.
Thanks to the integrated Electrostatic Shield and axial switch leads, the BH relay ensures High Insulation Resistance of 10 TOhm across open contacts as well as between coil and contacts, and thus very Low Leakage Current in the picoamperes range.
The outer Magnetic Shield protects the relays against a mutual interaction and therefore allows an assembly with higher density.
This variable Multi-channel Dry-switch design can be built with up to 4 switches Form A and, thanks to its features such as reliable switching behavior, long lifetime and Low Contact Resistance (ON-Resistance), it makes an ideal relay for precise testers, automated test equipment or an alternative for Mercury Relays.
Miniature high voltage relay combines a reliable switching and high isolation properties with a compact design. Designed for demanding applications such as isolation measurement in Battery Management Systems or any other, where low leakage currents are required.
Creepage and clearance distances consistent with international standards IEC 60664-1, ISO 6469-3, IEC 60601-1 and IEC 62109-1/2.
SMD style with no internal solder joints – reflow soldering compatible.
Tested in accordance with AEC-Q200, UL Approved, RoHS/REACH.
Our most versatile general purpose BE Series Reed Relay with many contact configuration options including up to 5 form A switches. Available in latching or high IR typical 10^13 Ω. Plastic or metal housing, epoxy encapsulated.
The LI series is a high voltage reed relay and high insulation reed relay that is epoxy encapsulated. This high voltage reed relay features a high insulation resistance (IR) >10^13 Ω and is capable of switching up to 1kVDC, breakdown voltage of 4.5kVDC, isolation voltage to 7kVDC. UL approval.
The KT series high voltage reed relay and high insulation reed relay is available in both a surface mount (SMD) or through-hole (THT) design. This high voltage reed relay is capable of switching up to 1kVDC, breakdown voltage of 4.5kVDC, isolation voltage to 7kVDC and features a high insulation resistance (IR) >10^13 Ω. This KT series is supplied in a rugged thermoset overmolded package. Tested in accordance with AEC-Q200, UL listed.
The SHV reed relay is a single in-line and high voltage relay or instrumentation grade reed relay supplied in a molded housing, capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^11 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series. It is even smaller than the former potted SIL-HV Reed Relay.
® Copyright 2024 Standex Electronics, Inc. ® All Rights Reserved. A Standex International Corporation Company.
