Contact Us
Contact Us Stock Check

567 Series Optocouplers

Description

567 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, cutoff 500kHZ, ATEX Certified (11ATEX 0086, DIN EN 60062). Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 14mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.

Certificate of Type Examination

Declaration of Conformity

Mounting Instruction

Specifications

Isolation Voltage Input/Output Min. (VDC)4000
Output Current lo (mA) Max.50
Supply Voltage (VDC) Max5
Turn On/Off Time(µsec)0.5/0.5
Creeping Distance, Air Path I/O Min. (mm)14
Ambient Temperature °C-20 to 85

Applications

Any factory that requires high isolation and non-arcing environments, flammable gas processing plants, medical processing plants where ESD could be a real problem, mining operations

Series Data Sheet (PDF)
 
Print

Stock Check

Item No.DatasheetDistributorRegionQuantityCartRFQInventory Date
567Standex FactoryAmericas0 RFQ2018-12-14
567Mouser ElectronicsAmericas159 BUY RFQ2018-12-14
567Mouser ElectronicsAmericas12 BUY RFQ2018-12-14
567Mouser ElectronicsAmericas0 RFQ2018-12-14
567Arrow ElectronicsAmericas0 RFQ2018-12-14
567Arrow ElectronicsAmericas10 BUY RFQ2018-12-14

Associated Parts

521 Series Optocouplers for the galvanic separation of intrinsic safety circuits, Isolation voltage min. 6kVDC, CTR min. 0.5, cutoff 50kHZ. Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 24.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.

Miniature 522 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 0.5, cutoff 85kHZ, ATEX Certified (11ATEX 0086, DIN EN 60062). Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 12mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.

Certificate of Type Examination

Declaration of Conformity

Mounting Instruction

525 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 0.5, cutoff 50kHZ, ATEX Certified (11ATEX 0086, DIN EN 60062). Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 14.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.

Certificate of Type Examination

Declaration of Conformity

Mounting Instruction

528 Series Optocouplers for the galvanic separation of intrinsic safety circuits, Isolation voltage min. 10kVDC, CTR min. 0.9, cutoff 50kHZ. Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements up to 42mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.

530-70 Series Optocouplers for the galvanic separation of intrinsic safety circuits, Isolation voltage min. 22kVDC, CTR min. 0.8%, cutoff 100kHZ. Insulation resistance input /output up to 10^12 Ω. Distance between input and output for highest safety requirements min. 39mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.

535 Series Optocouplers for the galvanic separation of intrinsic safety (EXi) circuits, Isolation voltage min. 4kVDC, CTR min. 3.0, cutoff 2kHZ, ATEX Certified (11ATEX 0086, DIN EN 60062). Insulation resistance input /output up to 10^13 Ω. Distance between input and output for highest safety requirements up to 14.5mm. Galvanic separation and minor coupling capacitance between input and output circuit. Analog & digital signal transfer is possible. Minor output delay times compared to relays. Long life due to non mechanical wear. Magnetic fields do not impact operation. A photo-diode makes for very short cycle times. Able to invert the output signal during transfer.

Certificate of Type Examination

Declaration of Conformity

Mounting Instruction

Technical Papers

Datasheets

Brochures & Catalogs

Applications

Media

Standex Electronics | Company Video

Standex Electronics is a worldwide market leader in the design, development, and manufacture of standard and custom electro-magnetic components, including magnetics products and reed switch-based solutions.

In this video, we discuss our global manufacturing and supply chain capabilities by fueling the processes that we often take for granted every day. Through our diverse in-house capabilities and strong engineering designs we PARTNER with our customers to SOLVE their unique challenges, and DELIVER custom high-performing solutions...

Standex Electronics | Values

Standex Electronics new company video shares our global manufacturing and supply chain capabilities through our partner, solve, and deliver approach.

Standex Electronics dynamic engineering and diverse product line of custom and standard components deliver reliable high-quality solutions to customers across broad markets and applications. Our robust product offerings include Reed Switches, Relays, and Sensors, Planar Transformers and Inductors, and Fluid Level Sensors that provide solutions for the Automotive, HVAC, Alternative Energy, Lighting/LED, Appliance, Mil-Aero, Medical, and many others...

Standex Electronics Japan | Company Video

Standex Electronics Japan is a worldwide market leader in the design, development, and manufacturing of magnetic reed switches. Headquartered in Kofu City, Japan it was previously branded as the OKI Sensor Device Corporation prior to being acquired by Standex Electronics, Inc., a division of Standex International. The new name of OKI Reed Switches is KOFU, A Standex Electronics Brand.

Reed Switches for Smart Home Automation Systems

Reed Switches work well with smart home automation systems because they draw no power compared to other magnetic sensing elements. They can be married to a wireless or Bluetooth technology and placed in remote battery powered door sensors or window sensors, or anything where you’re looking for movement or proximity. They’re a very cost-effective and robust component suitable for the home environment, requiring fewer connections resulting in longer battery life.

In today’s homes and also commercial properties, there’s an increased necessity for control to improve efficiency and productivity. And with that control, you have different products that measure temperature, water levels, security, and locks, so within those products reed switches play a major role in making them “smart”.

Standex Electronics is a global leader in the design, development, and manufacturing of standard and custom Reed Switches.

Product Training Module – RF Reed Relays Part I

Welcome to Standex Electronics' RF Reed Relays Part I training module. Reed relays have long been known to have the capability to switch and carry RF signals and fast digital pulses. Hardly anyone thought reed relays were capable of switching and carrying RF up to 20 GHz, because the reed switch's leads are composed of nickel/iron which has a relatively high permeability or (MU). However, 20GHz is now a reality at Standex Electronics. We will be presenting the reasons Standex Electronics and their design team have made this possible.

Product Training Module – RF Reed Relays Part II

Welcome to Standex Electronics' RF Reed Relays Part II training module. This second RF presentation assumes you have already heard the first Standex Electronics RF Part I presentation. Understanding the simple physical layout of a reed relay makes it easy to design and rest reed relays for RF and fast digital pulse applications. RF is dependent on the physical layout or signal path it takes while going through circuits and the components that make up those circuits. We will show you how the physical layout of the reed relay will have a direct bearing on the RF signal's success going into and out of the reed relay. Coupled with the relay's physical layout, the materials making up the reed relay are also important.

Product Training Module – Reed Relay Overview

Welcome to Standex Electronics Reed Relay training module. This module will define key terms used in reed relays and their applications. The module will also describe the structure and function of reed relays and their vast number of applications.

Product Training Module – Magnet Technology & Their Uses

Welcome to Standex Electronics where we will be exploring what magnets are and how they are used in the electronic industry. We will define the key terms relating to magnets and we will explore what magnets are, what they do, and how they are used.

Product Training Module – Latching Form B Reed Relays & Sensors

Welcome to Standex Electronics' Latching and Form B Reed Relay and Sensor training module. This module will define key terms of Form B and Latching sensors and relays. The module will also describe the structure and function of latching and Form B reed relays and sensors.

How a Reed Switch Works

The Reed Switch is the core element in Reed Sensors, Level Sensors and Reed Relays. A magnetic contact switch consisting of two ferromagnetic blades are hermetically sealed inside a glass tube. The glass tube is filled with a high purity inert gas. Under non operating conditions the reed switch contacts do not touch. Standex Electronics is leading the way in reed switch manufacturing...

How Reed Switches are Manufactured

Ultra miniature and high precision Reed Switch manufacturing in the most modern factory of its kind. Standex Electronics micro technology enables the mass production of Reed Switches at the highest quality for competitive pricing. The complete process from the sputtering of the magnetic contacts through the hermetic sealing and final testing...

Reed Switch Technology

Standex Electronics expert discusses reed switch technology and why reed switches play such an important role in many applications.

3D Magnetic Mapping for Sensor Applications

Standex Electronics's technical expert describes their 3D Magnetic Mapping capabilities used in reed sensor applications

Reed Switch SMD Sensor & Magnet Actuation in 3-D

A Reed Switch Sensor on a surface mount PCB assembly shown in 3-D with actuating magnet. When viewed in three dimensions, the magnetic flux lines emanating from the magnet look like a beer barrel keg; and also in three dimensions, with the magnet parallel to the reed switch, the center magnetic lobe array looks like a donut and the two outside lobes look more like a boxer's punching bag -- the kind hung from the ceiling. Essentially the fields from the magnet and the fields for the lobes are symmetrical when viewed in three dimensions. As seen in two dimensions, when the magnet is brought into one of the lobes the reed switch contacts will close. Now, as seen in three dimensions the magnet can be brought into the lobes in any spherical direction for contact closure to occur. Here the magnet is moved into the sphere of influence of the lobes of the reed switch showing the closure and opening when the magnet enters the lobes and passes through them, The change in lighting signifies the closing and opening of the reed switch contacts.

Standex Electronics at AHR Expo 2013

Alex Vinnage talks about what attendees can expect from Standex Electronics at the 2013 AHR Expo.

Como se Fabrica un Ampolla Reed (ES)

Construir los interruptores de lengüeta no es ningún trabajo fácil. Ser la fábrica más moderna de su clase en Europa, nuestra producción en Turingia es un mundo de ellos mismos. El tamaño de estos componentes de alta precisión es extremadamente reducido, la capa ultrafina y el trabajo meticuloso se requieren en cada paso de la producción. Esta microtecnología permite la producción en masa de los productos de alta calidad a precios competitivos.

Linea de Productos Standex Electronics (ES)

Los Interruptores de Lengüeta, Relés de Lengüeta y Sensores de Lengüeta son nuestros productos más importantes. Estos tres grupos tienen una cosa en común: el Interruptor de Lengüeta es el elemento núcleo de todos ellos. Los Interruptores de Lengüeta so dispositivos operados magnéticamente, que han sido inventados por Laboratorios Bell a principios de los años 1940' en Estados Unidos. Funcionan con un principio simple:Dos hojas ferromagnéticas traslapadas de hierro se sellan en un tubo de cristal, separados por una distancia de solamente unos pocos micrones...

Comment fonctionnent les Ampoules Reed (FR)

Les ampoules Reed, les relais Reed et les capteurs Reed sont nos produits les plus importants. Ces trois groupes ont une chose en commun: l'ampoule Reed, « au cœur » de tous ces produits.. Les ampoules Reed sont des appareils activés magnétiquement, qui furent inventés par Bell Labs aux Etats-Unis dans les années 1940. Ils fonctionnent selon un principe simple: Deux lames ferromagnétiques qui se chevauchent , sont scellées dans un tube de verre, séparées par une distance de quelques microns seulement...

Comment sont fabriquées les Ampoules Reed (FR)

Fabriquer des ampoules Reed n'est pas un travail facile. Etant l'usine la plus moderne dans son genre en Europe, notre production de Thuringe est « dans un autre monde » . La taille de ces composants à haute précision est extrêmement petite, l'enduit ultra-mince, un travail méticuleux est exigé dans chaque étape de production. Cette micro technologie permet la production en série de produits de qualité aux prix concurrentiels...

Benvenuti in MEDER (IT)

Molto spesso sono le cose più piccole ad avere l'impatto maggiore nella nostra vita. A volte non le percepiamo neanche, anche se rendono la nostra vita più confortevole e sicura. Sono utilizzate in veicoli, ingegneria della sicurezza, elettrodomestici, dispositivi medici, telecomunicazione e sistemi industriali di ogni tipo. Precisi, affidabili e di lunga durata. Questi interruttori reed, sensori e relè miniaturizzati lavorano instancabilmente secondo la legge di Reed. Anche se a prima vista sembrano semplici, sono in realtà delle vere e proprie meraviglie dell'ingegneria che solo poche aziende al mondo sono in grado di produrre. E noi siamo una di esse: MEDER electronic. Prodotti innovativi per il futuro...

Gamma di prodotti Standex Electronics (IT)

Interruttori reed, relè reed e sensori reed sono i nostri prodotti più importanti. Queste tre categorie di prodotti hanno una cosa in comune: l'ampolla reed, che è il loro elemento centrale. Le Ampolle reed sono dispositivi azionati magneticamente, che furono inventati nei primi anni '40 negli Stati Uniti, nei laboratori Bell. Funzionano secondo un principio molto semplice: due lame di materiale ferromagnetico sono ermeticamente sigillate all'interno di un tubo di vetro...

SUBSCRIBE TO OUR NEWSLETTER

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials Through MailChimp.

Tradeshows & Events

Follow Us

Focused. Leadership

Video
Download Table
Products compare