The PM-SCS50Fx075S-01022S Magnet in Bolt Casing is a potted South Pole magnet housed in a socket cap screw. The socket cap screw is 18-8 Stainless Steel and measures 1/2-20 by 0.75″ long. The internal magnet is a Neodymium (NEO 35 SH) cylinder magnet measuring 0.375 inches in dia. x 0.25 inches long. Furthermore, the magnet engraved with an “S” for South Pole.
NOTES:
Contact Sensor Solutions to discuss custom sensor and magnet requirements for your application.
The RM-01-020 Magnet for Position and Speed Sensors is a radial magnetized bare magnet. This Neodymium (NEO 35 SH) nickel-plated magnet is a cylindrical and measures 0.250 inches in diameter by 0.250 inches long. Furthermore, the magnet engraved with an “S” for South Pole.
NOTES:
Contact Sensor Solutions to discuss custom sensor and magnet requirements for your application.
The M12-HS1-5KP21 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.
When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet.
The M12-HS1-5KP21 Hall Switch Sensor has an NPN input with a 5k pull up resistor. Furthermore, the sensor is potted in a plastic cylindrical threaded housing 12x1mm x 35mmL with wire leads.
HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!
Other features include:
The A47-HS1-P5P21 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.
When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet.
The A47-HS1-P5P21 Hall Switch Sensor has an PNP input with a 5k pull up resistor. Furthermore, the sensor is potted in a black anodized aluminum 5/32-32 cylindrical housing with wire leads.
HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!
Other features include:
The A47-HS1-5KP21 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.
When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet.
The A47-HS1-5KP21 Hall Switch Sensor has an NPN input with a 5k pull up resistor. Furthermore, the sensor is potted in a black anodized aluminum 5/32-32 cylindrical housing with wire leads.
HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!
Other features include:
The S38-HS1-5KP21 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.
When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet.
The S38-HS1-5KP21 Hall Switch Sensor has an NPN input with a 5k pull up resistor. Furthermore, the sensor is potted in a stainless steel 3/8-24 cylindrical housing with wire leads.
HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!
Other features include:
The M12-HS1-5KCB2 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.
When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet.
The M12-HS1-5KCB2 Hall Switch Sensor has an NPN input with a 5k pull up resistor. Furthermore, the sensor is potted in a plastic M12 cylindrical housing with integral connector.
HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!
Other features include:
The S18-SSTHS1-R5SA5-30 Hall Effect Magnet Speed Switch detects rotational or linear over or under speed conditions. Operating at 55 Gauss sensitivity, the S18-SSTHS1-R5SA5-30 is actuated by a south pole moving magnet. The Speed Switch turns on when the transistor output goes low. The programmed switching frequency is 30 Hz. So, a low output means that an over-speed condition has occurred. Conversely, the switch turns off when the output goes high, indicating an under-speed state.
The S18-SSTHS1-R5SA5-30 Speed Switch has a regulated input and NPN output with a 5k pull up resistor. This sensor is potted in an M18 stainless barrel housing with a 4-wire shielded PVC cable.
“SSM” type Speed Switches detect Magnets moving past the sensor face. The operate gap range will be dependent on the material, size, and grad of target magnet. The switching frequency will depend on the number of magnets.
No rotational orientation is required for the sensor to operate. Lock nuts are used to set the air gap within the rage of the sensing target.
Other features include:
® Copyright 2024 Standex Electronics, Inc. ® All Rights Reserved. A Standex International Corporation Company.
