Contact Us
Contact Us Stock Check

All Reed Sensors |

MK01 Reed Sensor

SPDT Changeover surface mount (SMD) MK01 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection with high power switch option. Supplied in tape and reel according to IEC 286/part 3. UL Approval

UL Certificate of Compliance

MK02 Reed Sensor

Ferrous metal detection screw fastened flange mount MK02 Series Reed Sensor in a rectangular housing with cable terminals. Front or above operation. UL Approval, IP67 Rated

UL Certificate of Compliance (MKxx/xU *Series followed by U)

MK02/6, MK02/7 Reed Sensor

Ferrous metal detection through-hole mount (THT) MK02/6, MK02/7 Series Reed Sensor in a rectangular housing with cable terminals. Front or above operation.

MK03 Reed Sensor

Panel mount (5.75mm) MK03 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Optional internal switch, cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK04 Reed Sensor Dimensions

Best value screw fastened flange mount MK04 Series Reed Sensor in a rectangular housing with cable terminals. Used in position, proximity, motion, level, and end limit sensing. Optional internal switch, cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK05 Reed Sensor

Best value screw fastened flange mount MK05 Series Reed Sensor in a rectangular housing with cable terminals. Used in position, proximity, motion, level, and end limit sensing. Optional internal switch, cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK06 Reed Sensor

Miniature through-hole mount (THT) MK06 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection. 1 inch (2.54mm) pin spacing available. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK07 Reed Sensor

Plastic M8 adjustable thread mount MK07 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Used in position, level, and end limit detection w/convenient sensing adjustment. Optional internal switch, cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK08 Reed Sensor

ATEX & IECEx approved (intrinsically safe) panel mount MK08 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Optional internal switch, cable, length, and termination. Oil resistant wire, operate -40°C to +130°C. Certified to operate in hazardous locations or potentially explosive environments. KEMA 00ATEX1112 X, IECEx KEM09.0006 X


Type of protection: II 2 GD Ex mb II T6
II 2 GD Ex tD A21 IP65 T85 °C
In accordance with: IEC/EN 60079-0, IEC/EN 60079-18, IEC/EN 61241-0, IEC/EN 61241-1

ATEX Examination Certificate

ATEX Declaration of Conformity

IECEx Certificate of Conformity

Mounting Instructions for MK08

UL Certificate of Compliance (MKxxU *Series followed by U)


 

MK10 Reed Sensor Minature Through Hole

The MK10 Series Reed Sensor is an ultraminiature through hole (THT) mount sensor with integrated internal resistor (many resistance options available). The MK10 is used in On/Off control switch, proximity, motion, position detection applications.

UL Certificate of Compliance

MK11 Stainless Steel Reed Sensor

M5/M8 adjustable thread mount MK11 Stainless Steel Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Used in position, level, and end limit detection w/convenient sensing adjustment. Optional internal switch, cable, length, and termination. UL Approval, IP67 Rated

UL Certificate of Compliance (MKxxU *Series followed by U)

MK11Brass Reed Sensor

M6, M8, M10 and M12 adjustable thread mount MK11 Brass Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals with optional high voltage switch. Used in position, level, and end limit detection w/convenient sensing adjustment. Optional internal switch, cable, length, and termination. UL Approval, IP67 Rated

UL Certificate of Compliance (MKxx/BxU *Series followed by U)

MK11 Plastic Reed Sensor

M8 adjustable thread mount MK11 Plastic Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals with optional high voltage switch. Used in position, level, and end limit detection w/convenient sensing adjustment. Optional internal switch, cable, length, and termination. UL Approval, IP67 Rated

UL Certificate of Compliance (MKxx/MxU *Series followed by U)

MK13 Reed Sensor

Best value screw fastened flange mount MK13 Series Reed Sensor in a rectangular housing with cable terminals. Used in position, proximity, motion, level, and end limit sensing. Optional internal switch, cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK14 Reed Sensor

Panel mount (4.0mm) MK14 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Optional internal switch, cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK15 Reed Sensor

Normally closed (SPST-N.O.) surface mount (SMD) MK15 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection. Supplied in tape and reel according to IEC 286/part 3. Axial or gull-wing lead, high power switch. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK16 Reed Sensor

Miniature surface mount (SMD) MK16 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection. Supplied in tape and reel according to IEC 286/part 3. Axial or gull-wing lead designs available. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK17 Reed Sensor

Ultraminiature surface mount (SMD) MK17 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection. Supplied in tape and reel according to IEC 286/part 3. Axial, gull-wing or J-lead designs available. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK18 Reed Sensor

Panel mount (5.0mm) MK18 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Optional internal switch, cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxxU *Series followed by U)

MK20/1 Reed Sensor

Miniature (3.0mm) panel mount MK20/1 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Optional cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxx/xU *Series followed by U)

MK20/2 Reed Sensor

Ultraminiature (2.7mm) panel mount MK20/2 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Optional cable, length, and termination. UL Approval

UL Certificate of Compliance (MKxx/xU *Series followed by U)

MK21P, MK21M Reed Sensor

High temperature resistant screw fastened flange mount MK21P, MK21M Series Reed Sensor in a rectangular housing with cable terminals. Used in position, level, and end limit sensing. Molded (M) version for high temperature resistance up to +150°C. Optional internal switch, cable, length, and termination. UL Approval, IP67 Rated

UL Certificate of Compliance (MKxxU *Series followed by U)

MK22 Reed Sensor

Miniature surface mount (SMD) MK22 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection. Supplied in tape and reel according to IEC 286/part 3. Axial or gull-wing lead designs available. UL Approval

UL Certificate of Compliance

MK23 Reed Sensor

Best value ultraminiature bare glass surface mount (SMD) MK23 Series Reed Sensor series used in On/Off control switch, proximity, motion, position detection with high voltage and Form C (SPDT Changeover) options. Supplied in tape and reel according to IEC 286/part 3. Axial, gull-wing, inverse gull-wing, J-lead or helix lead designs available. UL Approval

UL Certificate of Compliance

MK24 Reed Sensor Dimensions

Ultraminiature surface mount (SMD) MK24 series reed sensor used in On/Off control switch, proximity, motion, position detection with optional Form B (SPST-N.C.) contact form. Supplied in tape and reel according to IEC 286/part 3. Axial or gull-wing lead designs available. UL Approval

UL Certificate of Compliance

MK25 Reed Sensor

ATEX & IECEx approved (intrinsically safe) contactless push button panel mount MK25 Series Reed Sensor. Optional internal switch, cable, length, and termination. Button plates, emergency stop buttons, etc. can be provided with laser inscriptions as required. The information is burnt into the surface and thus, unlike with print-inscribed elements, is very durable. KEMA 05ATEX1206X, KEM 09.0005X Certified to operate in hazardous locations or potentially explosive environments.


Type of protection: II 2 G Ex mb IIC T6
II 2 D Ex tD A21 IP65 T85 °C
In accordance with: IEC/EN 60079-0, IEC/EN 60079-18, IEC/EN 61241-0, IEC/EN 61241-1

ATEX Examination Certificate

ATEX Declaration of Conformity

IECEx Certificate of Conformity

Mounting Instructions for MK25


 

MK26 Reed Sensor

High voltage screw fastened flange mount MK26 Series Reed Sensor in a rectangular housing with cable terminals. Used in position, proximity, motion, level, and end limit sensing. Optional internal switch, cable, length, and termination. IP67 Rated

MK27 Reed Sensor

High voltage aluminum screw fastened flange mount MK27 Series Reed Sensor in a rectangular housing with cable terminals. Ideal in harsh environments for proximity, position, motion, and end limit detection. Sensing distance up to 40mm, magnet included. Optional internal switch, cable, length, and termination. IP67 Rated

MK28 Reed Sensor

Magnetically conductive vane operated screw fastened MK28 Series Reed Sensor with cable terminals is ideal in harsh environments.

MK30 Reed Sensor

High voltage surface mount (SMD) MK30 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection. Supplied in tape and reel according to IEC 286/part 3. Gull-wing lead design. UL Approval

Ultraminiature surface mount (SMD) MK31 Series Reed Sensor used in On/Off control switch, proximity, motion, position detection. Supplied in tape and reel according to IEC 286/part 3. J-lead design. UL Approval

SUBSCRIBE TO OUR NEWSLETTER

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials Through MailChimp.

Tradeshows & Events

Electric & Hybrid Vehicle Technology Expo 2019
Time: Sep 10-12, 2019
Place: Suburban Collection Showplace, Novi, Michigan USA
Booth No.: 2005
For More Details, Click Here.

electronica India 2019
Time: September 25-27, 2019
Place: India Expo Center, Greater Noida, Delhi NCR, India
Booth No.: EI21
For More Details, Click Here.

Follow Us

Focused. Leadership

Video
Download Table
Products compare