The AM-M1H2-04022S Magnet for Angle Position Sensors is a potted radial magnetized magnet. The Housing measures 1.0-inch x 0.5 inches and features 2 Mounting Holes. The raw magnet produces 400 Gauss at .060″ and 200 Gauss at 0.215″ Gap. Using this housing, operate the APSxxx sensors using a sensing gap from 0.010″ to 0.110″.
NOTES:
Contact Sensor Solutions to discuss custom sensor and magnet requirements for your application.
Aerospace, Agricultural, Automotive/Heavy Equipment, Consumer Electronics, Manufacturing, Marine, Medical, Military, Power Generation, Transportation
Series Data Sheet (PDF)
| Item No. | Datasheet | Distributor | Region | Quantity | Cart | RFQ | Inventory Date |
|---|---|---|---|---|---|---|---|
| AM-M1H2-04022S | Standex Factory | Americas | 0 | RFQ | 2025-04-23 |
The RM-01-020 Magnet for Position and Speed Sensors is a radial magnetized bare magnet. This Neodymium (NEO 35 SH) nickel-plated magnet is a cylindrical and measures 0.250 inches in diameter by 0.250 inches long. Furthermore, the magnet engraved with an “S” for South Pole.
NOTES:
Contact Sensor Solutions to discuss custom sensor and magnet requirements for your application.
The RM-01-071 Magnet for Angle Position Sensors is a radial magnetized bare magnet. This Neodymium magnet measures 0.500 inches in diameter by 0.125 inches long. Furthermore, the magnet is North “N” and South “S” Pole marked.
NOTES:
Contact Sensor Solutions to discuss custom sensor and magnet requirements for your application.
The PM-SCS50Fx075S-01022N Magnet in Bolt Casing is a potted North Pole magnet housed in a socket cap screw. The socket cap screw is 18-8 Stainless Steel and measures 1/2-20 by 0.75″ long. The internal magnet is a Neodymium (NEO 35 SH) cylinder magnet measuring 0.375 inches in dia. x 0.25 inches long. Furthermore, the magnet engraved with an “N” for North Pole.
NOTES:
Contact Sensor Solutions to discuss custom sensor and magnet requirements for your application.
The PM-SCS50Fx075S-01022S Magnet in Bolt Casing is a potted South Pole magnet housed in a socket cap screw. The socket cap screw is 18-8 Stainless Steel and measures 1/2-20 by 0.75″ long. The internal magnet is a Neodymium (NEO 35 SH) cylinder magnet measuring 0.375 inches in dia. x 0.25 inches long. Furthermore, the magnet engraved with an “S” for South Pole.
NOTES:
Contact Sensor Solutions to discuss custom sensor and magnet requirements for your application.
Welcome to Standex Electronics' How to Select the Correct Technology for a Given Sensor Requirement. We will focus on the following sensor technologies - Reed, Hall, and Electromechanical. These sensors all provide a switching function either directly or indirectly. We will introduce the key specifications, and how these parameters compare to each other for the different technologies.
® Copyright 2025 Standex Electronics, Inc. ® All Rights Reserved. A Standex International Corporation Company.
