Fluid Sensors & Floats | Introduction

Standex-Meder supplies fluid sensors & floats that use a wide range of technologies - from magnetic Reed Switch technology to conductive technology. Standex-Meder designs fluid sensors for liquid level and flow level detection and monitoring that are appropriate for each individual application. From basic sensors which are driven by external electronics to turnkey sensor systems with switched outputs, Standex-Meder delivers solutions to the most demanding fluid level sensing applications.

Custom Reed & Conductive Liquid Level Sensors

Standex-Meder supplies fluid level sensors that use a wide range of technologies - from magnetic Reed Switch technology to conductive technology. Standex-Meder designs fluid level sensors that are appropriate for each individual application. From basic sensors which are driven by external electronics to turnkey sensor systems with switched outputs, Standex-Meder delivers solutions to the most demanding fluid level sensing applications.

Horizontal Mount Liquid Level Sensor

Horizontal Mount Liquid Level Sensor products can be mounted on the side of the liquid reservoir or vessel using their hardware either internally or externally.

R12456 Series Liquid Level Sensor

Horizontal mount R12456 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Yazaki P/N 7283-6434-40.

R12449 Series Liquid Level Sensor

Horizontal mount R12449 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Toyota connector P/N 90980-11068.

R12431 Series Liquid Level Sensor

Horizontal mount R12431 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Connector meets requirements of Packard P/N 12162289.

LS03-S Series Liquid Level Sensor

Compact stainless steel single level horizontal mount LS03 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS03 Series Liquid Level Sensor

Compact single level horizontal mount LS03 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

HVAC/R Liquid Level Sensor

Standex-Meder Flood Prevention Switches (FPS) HVAC/R series are simple to install, easy to service and extremely reliable. As water level in the auxiliary or main drain pipe rises (due to a clogged air conditioning condensate drain) the switch shuts off the system, thus preventing water from overflowing, causing damage to floors, walls and ceilings. Utilizing proven expert magnetic reed switch technology that feature Low voltage switching and reliable “no-stick” float design so switch operates smoothly every time. Quick and hassle free install and service features include: simple switch access, precision, no adjust switch install / removal, automatic switch reset, one spliced connection, flexible red or yellow wire connection, installation on primary and auxiliary drain pans and outlets, and high performance in low 1" drain pans.

FPS-T Series (HVAC/R) Liquid Level Sensor

FPS-T Series (HVAC/R) Liquid Level Sensor tee model flood prevention switches are simple to install, easy to service and extremely reliable. As water level in the auxiliary or main drain pipe rises (due to a clogged air conditioning condensate drain) the switch shuts off the system, thus preventing water from overflowing, causing damage to floors, walls and ceilings. Ideal in commercial or residential installation to primary condensate drains vertical and horizontal, including a close coupled plugged or vertical drain option. Our most versatile plug-n-play model includes two “Do-It-All” custom tee pipe fittings for easy and flexible installation options. UL508, NEC and IMC compliant.

FPS-L Series (HVAC/R) Liquid Level Sensor

FPS-L Series (HVAC/R) Liquid Level Sensor elbow model flood prevention switches are simple to install, easy to service and extremely reliable. As water level in the auxiliary or main drain pipe rises (due to a clogged air conditioning condensate drain) the switch shuts off the system, thus preventing water from overflowing, causing damage to floors, walls and ceilings. Ideal in commercial or residential installation to primary or auxiliary condensate drain plugs. This model includes a custom elbow pipe fitting to accommodate easy installation to primary or auxiliary drain plugs. UL508, NEC and IMC compliant.

FPS-B Series (HVAC/R) Liquid Level Sensor

FPS-B Series (HVAC/R) Liquid Level Sensor bracket model flood prevention switches are simple to install, easy to service and extremely reliable. As water level in the auxiliary or main drain pipe rises (due to a clogged air conditioning condensate drain) the switch shuts off the system, thus preventing water from overflowing, causing damage to floors, walls and ceilings. Ideal in commercial or residential installation to primary or auxiliary condensate drain pans. This model includes a custom bracket that clips onto primary or auxiliary drain pans. UL508, NEC and IMC compliant.

Liquid Flow Sensors

Standex-Meder designs and manufactures custom reed switch and magnet based liquid flow sensors for specific customer applications. The designs often include harsh environments, significant durability requirements, and precise flow rate switching.

Liquid Level Sensors

Our liquid level sensors with integrated magnetic floats and cable terminals are used to detect low fluid levels or multiple fluid points. Choose from vertical or horizontal mount options and a range of switching options. They are simple, dependable, versatile, and low cost. Easily customizable and simple to install, magnetic level sensors are low power devices that don’t require electronics, making them very appealing for most applications. Liquid level reed sensors are fast becoming the level sensing technology of the future. What is driving this is its key reed sensor characteristics. They draw zero voltage and current – no power until they are energized. They can sit for years never drawing any power. This attribute alone allows them to be designed-in, in many applications where power is scarce. This includes many battery driven applications.

FPS-T Series (HVAC/R) Liquid Level Sensor

FPS-T Series (HVAC/R) Liquid Level Sensor tee model flood prevention switches are simple to install, easy to service and extremely reliable. As water level in the auxiliary or main drain pipe rises (due to a clogged air conditioning condensate drain) the switch shuts off the system, thus preventing water from overflowing, causing damage to floors, walls and ceilings. Ideal in commercial or residential installation to primary condensate drains vertical and horizontal, including a close coupled plugged or vertical drain option. Our most versatile plug-n-play model includes two “Do-It-All” custom tee pipe fittings for easy and flexible installation options. UL508, NEC and IMC compliant.

FPS-L Series (HVAC/R) Liquid Level Sensor

FPS-L Series (HVAC/R) Liquid Level Sensor elbow model flood prevention switches are simple to install, easy to service and extremely reliable. As water level in the auxiliary or main drain pipe rises (due to a clogged air conditioning condensate drain) the switch shuts off the system, thus preventing water from overflowing, causing damage to floors, walls and ceilings. Ideal in commercial or residential installation to primary or auxiliary condensate drain plugs. This model includes a custom elbow pipe fitting to accommodate easy installation to primary or auxiliary drain plugs. UL508, NEC and IMC compliant.

FPS-B Series (HVAC/R) Liquid Level Sensor

FPS-B Series (HVAC/R) Liquid Level Sensor bracket model flood prevention switches are simple to install, easy to service and extremely reliable. As water level in the auxiliary or main drain pipe rises (due to a clogged air conditioning condensate drain) the switch shuts off the system, thus preventing water from overflowing, causing damage to floors, walls and ceilings. Ideal in commercial or residential installation to primary or auxiliary condensate drain pans. This model includes a custom bracket that clips onto primary or auxiliary drain pans. UL508, NEC and IMC compliant.

R12180 Series Liquid Level Sensor

Snap lock mount R12180 Series Liquid Level Sensor design with integrated connector is ideal in blow or injection molded bottles. Compatible with B12450 Series Magnetic Float (sold separate).

R11774 Series Liquid Level Sensor

Snap lock mount R11774 Series Liquid Level Sensor design with integrated connector is ideal in blow or injection molded bottles. Compatible with B12450 Series Magnetic Float (sold separate).

R12481 Series Liquid Level Sensor

Vertical bottom mount R12481 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Integrated o-ring seal. Compatible with B12482 Series Magnetic Float (sold separate). Mates with Packard P/N 12052641.

R12468 Series Liquid Level Sensor

Vertical bottom mount R12468 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Integrated o-ring seal. Float sold separate. Mates with Packard P/N 12052641.

R12406 Series Liquid Level Sensor

Vertical bottom mount R12406 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Indication delay feature.

R12421 Series Liquid Level Sensor

Vertical bottom mount R12421 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Indication delay feature.

R12372 Series Liquid Level Sensor

Vertical bottom mount R12372 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Indication delay feature.

R12072 Series Liquid Level Sensor

Vertical top mount R12072 Series Liquid Level Sensor snap-in design is ideal in blow or injection molded bottles. Adjustable sensing point up to 18 inches from top of bottle. Standard termination-0.25 inch open spade.

R12349 Series Liquid Level Sensor

Vertical bottom mount R12349 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Ford P/N E57B14A464AA.

R12347 Series Liquid Level Sensor

Vertical bottom mount R12347 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Ford P/N E57B14A464AA.

R12456 Series Liquid Level Sensor

Horizontal mount R12456 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Yazaki P/N 7283-6434-40.

R12449 Series Liquid Level Sensor

Horizontal mount R12449 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Toyota connector P/N 90980-11068.

LS05 Series Liquid Level Sensor

Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. Multiple floats with minimum 1.5” spacing, 1W-100W rated power, other cables, connectors. UL Approved.

LS04 Series Liquid Level Sensor

Versatile LS04 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring. Reservoir, tank, bottle or other container mounting configurations. Up to 6 floats, 1W-100W rated power, other cables, connectors.

LS03-S Series Liquid Level Sensor

Compact stainless steel single level horizontal mount LS03 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS03 Series Liquid Level Sensor

Compact single level horizontal mount LS03 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS02-S Series Liquid Level Sensor

Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 120°C. IP68 only up to screw in thread.

LS02 Series Liquid Level Sensor

Compact single level vertical mount LS02 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. IP68 only up to screw in thread.

LS01 Series Liquid Level Sensor

Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors.

Magnetic Float NBR (Nitrile Butadiene Rubber)

NBR Floats have excellent resistance to petroleum-derived liquids such as oil and gasoline and can be used in high temperature applications as well.

Magnetic Float MS02-NBR Series

The MS02-NBR Series Magnetic Float ring actuator magnet (excentric) have excellent resistance to petroleum-derived liquids such as oil and gasoline and can be used in high temperature applications as well. Suited for stems with an outer diameter up to 8.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02, LS02-S, LS04, LS05.

Magnetic Float MS01-NBR Series

The MS01-NBR Series Magnetic Float ring actuator magnet (excentric) have excellent resistance to petroleum-derived liquids such as oil and gasoline and can be used in high temperature applications as well. Suited for stems with an outer diameter up to 7.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02, LS02-S, LS04, LS05.

Magnetic Float PA (Polyamide)

Polyamide (PA) Floats, made of nylon, have a very high strength-to-weight ratio making them shock and abrasion resistant, enduring a pressure of 5 bar (73 PSI or 0.5 MPa).

Magnetic Float MS07-PA Series

The MS07-PA Series Magnetic Float ring actuator magnet (excentric) are made of nylon, have a very high strength-to-weight ratio making them shock and abrasion resistant as well as capable of enduring a 5 bar pressure (73 PSI or 0.5 MPa). Additionally, PA floats have a high resistance to many chemicals and are therefore an ideal solution in fuel tanks, oil containers or brake fluid reservoirs. Suitable for stems with an outer diameter up to 15.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02-S, LS05.

Magnetic Float MS02-PA Series

The MS02-PA Series Magnetic Float ring actuator magnet (excentric) are made of nylon, have a very high strength-to-weight ratio making them shock and abrasion resistant as well as capable of enduring a 5 bar pressure (73 PSI or 0.5 MPa). Additionally, PA floats have a high resistance to many chemicals and are therefore an ideal solution in fuel tanks, oil containers or brake fluid reservoirs. Suitable for stems with an outer diameter up to 8.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02-S, LS05.

Magnetic Float MS01-PA Series

The MS01-PA Series Magnetic Float ring actuator magnet (excentric) are made of nylon, have a very high strength-to-weight ratio making them shock and abrasion resistant as well as capable of enduring a 5 bar pressure (73 PSI or 0.5 MPa). Additionally, PA floats have a high resistance to many chemicals and are therefore an ideal solution in fuel tanks, oil containers or brake fluid reservoirs. Suitable for stems with an outer diameter up to 7.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02-S, LS05.

Magnetic Float PP (Polypropylene)

PP (polypropylene) Floats are rugged, highly resistant to many chemical solvents, bases and acids and have a water absorption of only 0.1%.

magnetic float b12450

The B12450 Series Magnetic Float located in bottle assembly, operates with fluid specific gravity at 0.79 min. Compatible with Liquid Level Sensor series R11774, R12180.

B12482 Series Magnetic Float

The B12482 Series Magnetic Float located in bottle assembly, specific gravity per application. Compatible with Liquid Level Sensor series R12481.

B12469 Series Magnetic Float

The B12469 Series Magnetic Float located in bottle assembly, specific gravity per application. Compatible with Liquid Level Sensor series R12468.

Magnetic Float MS06-PP Series

The MS06-PP Series Magnetic Float (MS06/1-PP, MS06/2-PP, MS06/5-PP, MS06/6-PP) ring actuator magnet (centric) are made of nylon, have a very high strength-to-weight ratio making them shock and abrasion resistant as well as capable of enduring a 5 bar pressure (73 PSI or 0.5 MPa). This float has no mounting hole therefore movement of the float for actuation requires the use of a guide tube within the fluid reservoir. Float is FDA approved and especially suitable for food & beverage applications. Actuator magnet is fully contained within the float therefore protected from all liquids. Float is suitable for removable tanks that require periodic refills such as is coffee makers or other beverage equipment; float is foam. Compatible with all Reed Sensor series.

Magnetic Float MS08-PP Series

The MS08-PP Series Magnetic Float ring actuator magnet (excentric) are made of nylon, have a very high strength-to-weight ratio making them shock and abrasion resistant as well as capable of enduring a 5 bar pressure (73 PSI or 0.5 MPa). Additionally, PA floats have a high resistance to many chemicals and are therefore an ideal solution in fuel tanks, oil containers or brake fluid reservoirs. Suitable for stems with an outer diameter up to 8.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02, LS02-S, LS04, LS05.

Magnetic Float MS04-PP Series

The MS04-PP Series Magnetic Float ring actuator magnet (centric) have excellent buoyancy with water absorption of only 0.1%. They are also highly resistant to chemical solvents, bases and acids making them an excellent choice for water-level sensors, automotive applications and producers of manufacturing and plant equipment. Suitable for stems with an outer diameter up to 9.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02, LS02-S, LS04, LS05.

Magnetic Float MS03-PP Series

The MS03-PP Series Magnetic Float ring actuator magnet (centric) have excellent buoyancy with water absorption of only 0.1%. They are also highly resistant to chemical solvents, bases and acids making them an excellent choice for water-level sensors, automotive applications and producers of manufacturing and plant equipment. Suitable for stems with an outer diameter up to 10.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02, LS02-S, LS04, LS05.

Magnetic Float MS02-PP Series

The MS02-PP Series Magnetic Float ring actuator magnet (excentric) have excellent buoyancy with water absorption of only 0.1%. They are also highly resistant to chemical solvents, bases and acids making them an excellent choice for water-level sensors, automotive applications and producers of manufacturing and plant equipment. Suitable for stems with an outer diameter up to 8.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02, LS02-S, LS04, LS05.

Magnetic Float MS01-PP Series

The MS01-PP Series Magnetic Float ring actuator magnet (excentric) have excellent buoyancy with water absorption of only 0.1%. They are also highly resistant to chemical solvents, bases and acids making them an excellent choice for water-level sensors, automotive applications and producers of manufacturing and plant equipment. Suitable for stems with an outer diameter up to 7.5mm; float is foam. Actuator magnet is contained within the float though partially exposed to the liquid material. Compatible with Liquid Level Sensor series LS01, LS02, LS02-S, LS04, LS05.

Magnetic Float V2A (Stainless Steel)

V2A Floats are made of rust-proof stainless steel and are resistant to high temperatures making them ideal for the Food & Beverage industry among others.

Magnetic Float MS10-S Series

The MS10-S Series Magnetic Float ring actuator magnet (excentric) are resistant to high temperatures up to 350°C (660°F) and ideal for food and beverage industry and high pressure applications. Suitable for stems with an outer diameter up to 9mm; hollow float. Actuator magnet is contained within the float therefore fully protected from the liquid material. Compatible with Liquid Level Sensor series LS02-S, LS05.

Magnetic Float MS09-S Series

The MS09-S Series Magnetic Float ring actuator magnet (excentric) are resistant to high temperatures up to 350°C (660°F) and ideal for food and beverage industry and high pressure applications. Suitable for stems with an outer diameter up to 9mm; hollow float. Actuator magnet is contained within the float therefore fully protected from the liquid material. Compatible with Liquid Level Sensor series LS02-S, LS05.

Multiple or Continuous Level

In multiple or continuous level sensor products, 100's of sensing points are possible. Information can be signaled with simple magnetic reed switches by mounting many reed switches to a PCB to give multiple liquid level point measurements. In this application resistors can be placed in circuit to provide discreet voltage outputs that will indicate one of many possible level points along the travel path of a magnetic float for continuous liquid monitoring.

LS05 Series Liquid Level Sensor

Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. Multiple floats with minimum 1.5” spacing, 1W-100W rated power, other cables, connectors. UL Approved.

LS04 Series Liquid Level Sensor

Versatile LS04 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring. Reservoir, tank, bottle or other container mounting configurations. Up to 6 floats, 1W-100W rated power, other cables, connectors.

Single Level

A single level fluid sensor has a single magnetic float that moves with the changing level of a fluid and measures either a critical low level of fluid or other single fluid level.

LS05 Series Liquid Level Sensor

Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. Multiple floats with minimum 1.5” spacing, 1W-100W rated power, other cables, connectors. UL Approved.

LS04 Series Liquid Level Sensor

Versatile LS04 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring. Reservoir, tank, bottle or other container mounting configurations. Up to 6 floats, 1W-100W rated power, other cables, connectors.

LS03-S Series Liquid Level Sensor

Compact stainless steel single level horizontal mount LS03 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS03 Series Liquid Level Sensor

Compact single level horizontal mount LS03 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS02-S Series Liquid Level Sensor

Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 120°C. IP68 only up to screw in thread.

LS02 Series Liquid Level Sensor

Compact single level vertical mount LS02 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. IP68 only up to screw in thread.

LS01 Series Liquid Level Sensor

Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors.

SPDT Changeover (1 Form C)

SPDT changeover reed switch products are a single (Form C) reed switch which is essentially a single pole double throw SPDT reed switch.  It is hermetically sealed with 3 leads: a common lead, a normally open lead, and a normally closed reed switch lead. When operated the common contact will swing from the normally closed contact to the normally open contact. This is caused by the magnetic field produced by a coil or the magnetic field from a magnet.  When the magnetic field is removed the changeover reed switches common contact will revert back and come to rest on the normally closed contact.

LS05 Series Liquid Level Sensor

Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. Multiple floats with minimum 1.5” spacing, 1W-100W rated power, other cables, connectors. UL Approved.

LS04 Series Liquid Level Sensor

Versatile LS04 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring. Reservoir, tank, bottle or other container mounting configurations. Up to 6 floats, 1W-100W rated power, other cables, connectors.

LS03-S Series Liquid Level Sensor

Compact stainless steel single level horizontal mount LS03 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS03 Series Liquid Level Sensor

Compact single level horizontal mount LS03 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS02-S Series Liquid Level Sensor

Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 120°C. IP68 only up to screw in thread.

LS02 Series Liquid Level Sensor

Compact single level vertical mount LS02 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. IP68 only up to screw in thread.

LS01 Series Liquid Level Sensor

Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors.

SPST-N.C. (1 Form B)

SPST-N.C. (1 Form B) Reed Switches are a single pole single throw reed switch that has it's contacts in the normally closed (Form B) position before any magnetic field is applied.

LS05 Series Liquid Level Sensor

Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. Multiple floats with minimum 1.5” spacing, 1W-100W rated power, other cables, connectors. UL Approved.

LS04 Series Liquid Level Sensor

Versatile LS04 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring. Reservoir, tank, bottle or other container mounting configurations. Up to 6 floats, 1W-100W rated power, other cables, connectors.

LS03-S Series Liquid Level Sensor

Compact stainless steel single level horizontal mount LS03 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS03 Series Liquid Level Sensor

Compact single level horizontal mount LS03 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS02-S Series Liquid Level Sensor

Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 120°C. IP68 only up to screw in thread.

LS02 Series Liquid Level Sensor

Compact single level vertical mount LS02 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. IP68 only up to screw in thread.

LS01 Series Liquid Level Sensor

Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors.

SPST-N.O. (1 Form A)

A SPST-N.O. (1 Form A) reed switch has it's contacts in the open state before any magnetic field is applied, drawing no power.

LS05 Series Liquid Level Sensor

Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. Multiple floats with minimum 1.5” spacing, 1W-100W rated power, other cables, connectors. UL Approved.

LS04 Series Liquid Level Sensor

Versatile LS04 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring. Reservoir, tank, bottle or other container mounting configurations. Up to 6 floats, 1W-100W rated power, other cables, connectors.

LS03-S Series Liquid Level Sensor

Compact stainless steel single level horizontal mount LS03 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS03 Series Liquid Level Sensor

Compact single level horizontal mount LS03 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 150°C.

LS02-S Series Liquid Level Sensor

Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 120°C. IP68 only up to screw in thread.

LS02 Series Liquid Level Sensor

Compact single level vertical mount LS02 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. IP68 only up to screw in thread.

LS01 Series Liquid Level Sensor

Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors.

Vertical Mount Liquid Level Sensor

A vertical mount liquid level sensor has one or more floats and can be mounted vertically to the top or bottom of liquid tank or reservoir.

R11774 Series Liquid Level Sensor

Snap lock mount R11774 Series Liquid Level Sensor design with integrated connector is ideal in blow or injection molded bottles. Compatible with B12450 Series Magnetic Float (sold separate).

R12481 Series Liquid Level Sensor

Vertical bottom mount R12481 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Integrated o-ring seal. Compatible with B12482 Series Magnetic Float (sold separate). Mates with Packard P/N 12052641.

R12468 Series Liquid Level Sensor

Vertical bottom mount R12468 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Integrated o-ring seal. Float sold separate. Mates with Packard P/N 12052641.

R12406 Series Liquid Level Sensor

Vertical bottom mount R12406 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Indication delay feature.

R12421 Series Liquid Level Sensor

Vertical bottom mount R12421 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Indication delay feature.

R12372 Series Liquid Level Sensor

Vertical bottom mount R12372 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Indication delay feature.

R12072 Series Liquid Level Sensor

Vertical top mount R12072 Series Liquid Level Sensor snap-in design is ideal in blow or injection molded bottles. Adjustable sensing point up to 18 inches from top of bottle. Standard termination-0.25 inch open spade.

R12349 Series Liquid Level Sensor

Vertical bottom mount R12349 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Ford P/N E57B14A464AA.

R12347 Series Liquid Level Sensor

Vertical bottom mount R12347 Series Liquid Level Sensor design is ideal in blow or injection molded bottles. Uses separate seal grommet and contains and internal snubber resistor. Mates with Ford P/N E57B14A464AA.

LS05 Series Liquid Level Sensor

Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure up to 12 bar. Multiple floats with minimum 1.5” spacing, 1W-100W rated power, other cables, connectors. UL Approved.

LS04 Series Liquid Level Sensor

Versatile LS04 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring. Reservoir, tank, bottle or other container mounting configurations. Up to 6 floats, 1W-100W rated power, other cables, connectors.

LS02-S Series Liquid Level Sensor

Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. High temperature resistance up to 120°C. IP68 only up to screw in thread.

LS02 Series Liquid Level Sensor

Compact single level vertical mount LS02 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. IP68 only up to screw in thread.

LS01 Series Liquid Level Sensor

Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors.

SUBSCRIBE TO OUR NEWSLETTER

Receive The Latest News About Our Products And Innovations Direct To Your Inbox Every Week.

Tradeshows & Events

electronica India 2015
Time: September 9-11, 2015
Place: New Delhi, Pragati Maidan
Booth No.: Hall 7E, Booth 15
For More Details, Click Here.

Follow Us

Focused. Leadership