Contact Us
Contact Us Stock Check

High Density Matrix Reed Relays |

Our high density matrix reed relays were designed for large, closely stacked matrices typically used in functional PCB test systems. Their standard internal magnetic shield supports a close stacking matrix while eliminating an magnetic coupling effects between relays.

High Voltage

The SHV reed relay is a single in-line and high voltage relay or instrumentation grade reed relay supplied in a molded housing, capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^12 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series. It is even smaller than the former potted SIL-HV Reed Relay.

UL – Certificate of Compliance

Miniature

CRR Reed Relay

Ultraminiature surface mount (SMD) low-profile CRR Series Reed Relay with high insulation resistance (IR) typical 10^13 Ω. Instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.

UL Certificate of Compliance

CRF Reed Relay

The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package.  The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.

UL Certificate of Compliance

UMS Reed Relay

Ultraminiature instrumentation grade single in-line (SIL) UMS Series Reed Relay used in very closely stacked matrices. Measure nearly 50% smaller than the standard MS series reed relay. Contains and internal magnetic shield. UL approval, AEC-Q200 certified.

UL Certificate of Compliance

Surface Mount (SMD)

CRR Reed Relay

Ultraminiature surface mount (SMD) low-profile CRR Series Reed Relay with high insulation resistance (IR) typical 10^13 Ω. Instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.

UL Certificate of Compliance

CRF Reed Relay

The CRF Series is an ultraminiature 7GHz (RF) high frequency reed relay design in a low-profile surface mount (SMD) package.  The RF reed relay features a high insulation resistance (IR) typical 10^13 Ω. This instrumentation grade relay comes in a rugged thermoset overmolded package with ceramic substrate. Supplied in tape and reel according to IEC 286/part 3. Ball grid array (BGA) optional. UL approval.

UL Certificate of Compliance

Through Hole (THT)

Ultraminiature 8-pole low profile through hole mount (THT) RM05-8A-SP Series Reed Relay module with standard dual in-line (DIL) pin-out (2mm raster) and integrated magnetic shield for high density board mounting. Equipped with an 8-channel relay driver with MAX4823 with kickback protection and parallel activation electronics. Designed to significantly reduce PCB space at 24% smaller than our RM05-8A, saves on wiring costs, and assembly costs.

MS Reed Relay

General purpose micro single in-line (SIL) MS Series Reed Relay with rugged thermoset overmolded package has a standard internal magnetic shield. This instrumentation grade relay can be stacked in close matrices. Available in high frequency version up to 1GHz. Optional diode. UL approval.

UL Certificate of Compliance

SILHV Reed Relay (DISCONTINUED) SHV Reed Relay Replacement

The SIL HV single in-line series is a high voltage reed relay and instrumentation grade reed relay supplied in an epoxy encapsulated package capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^12 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series.

*** This product has been discontinued and replaced by our SHV Reed Relay Series.***

SIL-HV – Product Discontinuation Announcement

SIL Reed Relay

General purpose instrumentation grade single in-line SIL Series Reed Relay is supplied in a rugged thermoset overmolded package. Utilizes minimum PCB area at only 50% compared to our DIP and DIL series. Available with dielectric strength 4kVDC. Optional diode and magnetic shield. UL approval.

UL Certificate of Compliance

The SHV reed relay is a single in-line and high voltage relay or instrumentation grade reed relay supplied in a molded housing, capable of switching up to 1kVDC and breakdown voltage of 4kVDC. This high voltage reed relay series features an insulation resistance >5 x 10^12 Ω and utilizes minimum PCB area, at only 50% compared to our DIP and DIL reed relay series. It is even smaller than the former potted SIL-HV Reed Relay.

UL – Certificate of Compliance

UMS Reed Relay

Ultraminiature instrumentation grade single in-line (SIL) UMS Series Reed Relay used in very closely stacked matrices. Measure nearly 50% smaller than the standard MS series reed relay. Contains and internal magnetic shield. UL approval, AEC-Q200 certified.

UL Certificate of Compliance

SUBSCRIBE TO OUR NEWSLETTER

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials Through MailChimp.

Tradeshows & Events

electronica India 2019
Time: September 25-27, 2019
Place: India Expo Center, Greater Noida, Delhi NCR, India
Booth No.: EI21
For More Details, Click Here.

Follow Us

Focused. Leadership

Video
Download Table
Products compare