Contact Us
Contact Us Stock Check

M12-HS1-5KP21 Hall Effect Switch Sensor

Description

The M12-HS1-5KP21 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.

When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet. 

The M12-HS1-5KP21 Hall Switch Sensor has an NPN input with a 5k pull up resistor.  Furthermore, the sensor is potted in a plastic cylindrical threaded housing 12x1mm x 35mmL with wire leads.

HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!

Other features include:

  • Internal Hysteresis
  • Lower Gauss Operation than Standard HS Sensor
  • Solid State (Nothing to wear out!)
  • Temperature Stable

Specifications

Output TypeNPN
Actuator MaterialMagnet, South Pole
Frequency50 kHz
Supply Voltage, Vcc4.2 ~ 24 V
Must Operate7.5 mT
Must Release0.5 mT
Operating Temp.-40 ~ 125 C
Package/CasePlastic Cylinder, Threaded 12x1mm x 35mmL
Termination StyleWire Leads

Applications

Agricultural, Automotive/Heavy Equipment, Consumer Electronics, Manufacturing, Marine, Medical, Military, Power Generation, Transportation

Series Data Sheet (PDF)
 
Print

Stock Check

Item No.DatasheetDistributorRegionQuantityCartRFQInventory Date
M12-HS1-5KP21Standex FactoryAmericas0 RFQ2024-02-26
M12-HS1-5KP21Arrow ElectronicsAmericas0 RFQ2024-02-26

Parametric Search

Sorry, but this part is not found in our part number listing

Associated Parts

The S38-HS1-5KP21 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.

When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet. 

The S38-HS1-5KP21 Hall Switch Sensor has an NPN input with a 5k pull up resistor.  Furthermore, the sensor is potted in a stainless steel 3/8-24 cylindrical housing with wire leads.

HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!

Other features include:

  • Internal Hysteresis
  • Lower Gauss Operation than Standard HS Sensor
  • Solid State (Nothing to wear out!)
  • Temperature Stable

The M12-HS1-5KCB2 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.

When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet. 

The M12-HS1-5KCB2 Hall Switch Sensor has an NPN input with a 5k pull up resistor.  Furthermore, the sensor is potted in a plastic M12 cylindrical housing with integral connector.

HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!

Other features include:

  • Internal Hysteresis
  • Lower Gauss Operation than Standard HS Sensor
  • Solid State (Nothing to wear out!)
  • Temperature Stable

The A47-HS1-P5P21 Hall Effect Switch Sensor is a single digital output south pole sensitive proximity sensor with a 55 gauss operate point. “HS” type Hall Effect Sensors are hall switch sensors that turn on and off with a magnet. Since this sensor is south pole sensitive, it does not respond to north pole magnetic fields.

When the south pole magnetic field is present, the sensor switches on producing a low output. Conversely, when the magnetic field retracts the sensor switches off producing a high output. No rotational sensor orientation is required for operation. Use the provided lock nuts to set the air gap from the target. Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet. 

The A47-HS1-P5P21 Hall Switch Sensor has an PNP input with a 5k pull up resistor.  Furthermore, the sensor is potted in a black anodized aluminum 5/32-32 cylindrical housing with wire leads.

HS1 Hall Effect Switch Sensors use square wave output pulses that can be used to detect speed, position, proximity, or count. Contact us with your specific requirements!

Other features include:

  • Internal Hysteresis
  • Lower Gauss Operation than Standard HS Sensor
  • Solid State (Nothing to wear out!)
  • Temperature Stable

Technical Papers

Datasheets
Datasheet – RM-01-071 Magnet for Position and Speed SensorsDatasheet – RM-01-020 Magnet for Position and Speed SensorsDatasheet – PM-SCS50Fx075S-01022S Magnet in Bolt CasingDatasheet – PM-SCS50Fx075S-01022N Magnet in Bolt CasingDatasheet – AM-M1H2-04022 Magnet for Angle Position SensorDatasheet – MFM7-AH5-5VP21 Analog Hall Effect Switch SensorDatasheet – S12-AH5-5VP21 Analog Hall Effect Switch SensorDatasheet – M12-HS1-5KP21 Hall Effect Switch SensorDatasheet – S12R-SSRHS1-NOSL5-001 Hall Effect Switch Speed SensorDatasheet – S12R-SSRDSO-NOSL5-001 Hall Effect Gear Tooth Speed SwitchDatasheet – A47-18ADSO-ODP21 Hall Effect Gear Tooth SensorDatasheet – A12F-18ADSO-ODP23 Hall Effect Gear Tooth SensorDatasheet – S38J-22ADSO-5KJA5 Hall Effect Gear Tooth SensorDatasheet – A63-37ADSO-5KJA5 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-P5P21 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-ODX0B Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-LNCP13 Hall Effect Gear Tooth SensorDatasheet – MFM7-APS90-LACD4 Hall Effect Angle Position SensorDatasheet – MFM7-APS180-LACD4 Hall Effect Angle Position SensorDatasheet – MFM7-APS360-LACD4 Hall Effect Angle Position SensorDatasheet – A63-APS360-LACB1E Hall Effect Angle Position SensorDatasheet – S63B-DHS1-5KCB2A Hall Effect Dual Switch SensorDatasheet – MFM7-DHS1-5KCD4 Hall Effect Dual Switch SensorDatasheet – S12-DHS1-5KSA5 Hall Effect Dual Switch SensorDatasheet – M12-HS1-5KCB2 Hall Effect Switch SensorDatasheet – A47-HS1-P5P21 Hall Effect Switch SensorDatasheet – A47-HS1-5KP21 Hall Effect Switch SensorDatasheet – S38-HS1-5KP21 Hall Effect Switch SensorDatasheet – S12H-275VPA-RGCB2 Hall Effect Metal Detection SensorDatasheet – MFM7-275VPD-RGCD4 Hall Effect Metal Detection SensorDatasheet – S18-275VPD-RICB1E Hall Effect Metal Detection SensorDatasheet – S12-275VPD-5VCB2 Hall Effect Metal Detection SensorDatasheet – S12-275VPD-RGP21 Hall Effect Metal Detection SensorDatasheet – S18-SSTHS1-R5SA5-30 Hall Effect Magnet Speed SwitchDatasheet – S12R-SSRDSO-NOSL5-500 Hall Effect Gear Tooth Speed SwitchDatasheet – S12R-SSRDSO-NCSL5-001 Hall Effect Gear Tooth Speed SwitchDatasheet – S12H-SSTDSO-R5CB2-500 Hall Effect Gear Tooth Speed SwitchDatasheet – S12H-SSTDSO-R5CB2-001 Hall Effect Gear Tooth Speed SwitchDatasheet – A44-18ADSO-P5P21 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-L5CP13 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-L5CD3 Hall Effect Gear Tooth SensorDatasheet – MFM61O-18ADSO-L5CP13 Hall Effect Gear Tooth SensorDatasheet – S12-18ADSO-5KCB2 Hall Effect Gear Tooth Sensor

Applications

Media

Product Training Module – Reed Sensor vs. Hall & Mechanical

Welcome to Standex Electronics' How to Select the Correct Technology for a Given Sensor Requirement. We will focus on the following sensor technologies - Reed, Hall, and Electromechanical. These sensors all provide a switching function either directly or indirectly. We will introduce the key specifications, and how these parameters compare to each other for the different technologies.

SUBSCRIBE TO OUR NEWSLETTER

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials.

Tradeshows & Events

APEC 2024
Time: Feb 25-29, 2024
Place: Long Beach Convention Center in Long Beach California
Booth No.: 1403
For More Details, Click Here.

Follow Us

Focused. Leadership

Video
Download Table
Products compare