Reed Switches reliably switch billions of operations. A reed switch uses simple magnet interaction to open and close it's contacts. And they consume no power in their normally open state. Reed switches are hermetically sealed so they can exist or be used in almost any environment. This is not the case for electromechanical and semiconductor switches. Our KSK-1A04 reed switch series is one of the world's smallest (3.95mm). Also the molded MK24 series surface mount design. These small switches have unique switching capabilities. So new applications in home appliances and low power devices are leading the reed switch industry. Standex Electronics is the world’s largest reed switch manufacturer. We produce more than 700 million reed contacts per year. Our switches feature the highest range of sizes, unique switching capabilities, quality and life expectancy. Since acquiring OKI reed switch manufacturing, Standex Electronics is the preferred worldwide source for reed switch technology. Some of our highest demanded switches are the ORD211, ORD213, ORD324, and ORT551, series. We are experts in specialized sensor packaging. Contact our engineers to discuss your design requirements.
Reed Switch ORD613 has a glass length of 7.0mm and diameter of 1.8mm. This super ultra-miniature single-contact reed switch is designed for general control of low-level loads under 30V with a rated power of 3 W and switching current 0.2 Amp DC. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. This ultraminiature reed switch is one of our most widely used switches. It features a close differential between the open and closure values or what is referred to as a narrow hysteresis. This is key in achieving a precise switching point as with small portable devices.
The Reed Switch ORT651 has a glass length of 14.0mm and diameter of 2.54mm. This ultra-miniature two-contact reed switch is designed for changeover type operation under 30V with a rated power of 3 W and switching current 0.2 Amp DC. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. Most used.
The MK33-66 surface mount reed switch is a bare glass sensor engineered with a new lead design, providing stability and optimum coplanarity. The unique barrel lead design provides superb solderability and self-alignment to the pads for easy pick and place. The MK33-66 is an ultraminiature 14mm automotive-grade version is capable of switching 200 VDC. Featuring an extremely low-profile construction, ideal for applications requiring small footprint in printed circuit board (PCB) assemblies. TheMK33-66 SMD series tiny footprint allows it to be mounted in a tight reed switch ladder array, for multi-point and continuous liquid level monitoring applications. Supplied in tape and reel according to IEC 60286- 3.
The MK33-87 surface mount reed switch is a bare glass sensor engineered with a new lead design, providing stability and optimum coplanarity. The unique barrel lead design provides superb solderability and self-alignment to the pads for easy pick and place. The MK33-87 is an ultraminiature 10mm version is capable of switching 200 VDC. Featuring an extremely low-profile construction, ideal for applications requiring small footprint in printed circuit board (PCB) assemblies. TheMK33-87 SMD series tiny footprint allows it to be mounted in a tight reed switch ladder array, for multi-point and continuous liquid level monitoring applications. Supplied in tape and reel according to IEC 60286- 3.
Reed Switch ORD213 has a glass length of 7.0mm and diameter of 1.8mm. And a rated power of 1 W, switching voltage 24 VDC, and switching current 0.1 Amp DC. This ultraminiature reed switch is one of our most widely used switches. It features a close differential between the open and closure values or what is referred to as a narrow hysteresis. This is key in achieving a precise switching point as with small portable devices.
Ultraminiature reed switch series manufactured by Standex Electronics are some of the smallest switches currently available in the world. One example is the KSK-1A04 series. Measuring just 3.95mm in glass length. This reed switch is produced in Germany and offers a unique flat lead construction. Furthermore, ultraminiature reed switch products have maintained their contact ratings as they've become smaller. This is due to advancements in reed switch contact materials and construction. Additionally, ultraminiature reed switches play an integral role in two of the most critical areas for miniaturization, the electronic and semiconductor equipment testing market and medical devices. But they they are also heavily used many other markets such as test equipment, telecommunications, security, automotive, appliances, industrial, and aerospace among others.
Reed Switch ORD613 has a glass length of 7.0mm and diameter of 1.8mm. This super ultra-miniature single-contact reed switch is designed for general control of low-level loads under 30V with a rated power of 3 W and switching current 0.2 Amp DC. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. This ultraminiature reed switch is one of our most widely used switches. It features a close differential between the open and closure values or what is referred to as a narrow hysteresis. This is key in achieving a precise switching point as with small portable devices.
Reed Switch ORD213 has a glass length of 7.0mm and diameter of 1.8mm. And a rated power of 1 W, switching voltage 24 VDC, and switching current 0.1 Amp DC. This ultraminiature reed switch is one of our most widely used switches. It features a close differential between the open and closure values or what is referred to as a narrow hysteresis. This is key in achieving a precise switching point as with small portable devices.
Ultraminiature MK23-80 surface mount reed switch with glass length of 7mm and diameter of 1.8mm. Rated power 10 W, switching voltage 170 VDC, switching current 0.5 Amp DC. The MK23-80 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
Our miniature reed switch series have glass lengths ranging from 9-14mm. Aside from being miniature, they draw no power in their normally open state. This makes them some of the most sought after switches in the industry. Miniature reed switches come in a variety of switching characteristics. Such as close differential, high current, mercury, high performance and even SPDT single pole double throw changeover contacts. Furthermore, their miniature size make them ideal in critical areas for miniaturization. Which are the electronic and semiconductor equipment testing market and medical devices. But they are also heavily used in test equipment, telecommunications, security, automotive, appliances, industrial, among other markets.
The Reed Switch ORT651 has a glass length of 14.0mm and diameter of 2.54mm. This ultra-miniature two-contact reed switch is designed for changeover type operation under 30V with a rated power of 3 W and switching current 0.2 Amp DC. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. Most used.
The MK33-66 surface mount reed switch is a bare glass sensor engineered with a new lead design, providing stability and optimum coplanarity. The unique barrel lead design provides superb solderability and self-alignment to the pads for easy pick and place. The MK33-66 is an ultraminiature 14mm automotive-grade version is capable of switching 200 VDC. Featuring an extremely low-profile construction, ideal for applications requiring small footprint in printed circuit board (PCB) assemblies. TheMK33-66 SMD series tiny footprint allows it to be mounted in a tight reed switch ladder array, for multi-point and continuous liquid level monitoring applications. Supplied in tape and reel according to IEC 60286- 3.
The MK33-87 surface mount reed switch is a bare glass sensor engineered with a new lead design, providing stability and optimum coplanarity. The unique barrel lead design provides superb solderability and self-alignment to the pads for easy pick and place. The MK33-87 is an ultraminiature 10mm version is capable of switching 200 VDC. Featuring an extremely low-profile construction, ideal for applications requiring small footprint in printed circuit board (PCB) assemblies. TheMK33-87 SMD series tiny footprint allows it to be mounted in a tight reed switch ladder array, for multi-point and continuous liquid level monitoring applications. Supplied in tape and reel according to IEC 60286- 3.
The KSK-1A35/1 Series Reed Switch is a miniature high voltage reed switch with glass length of 10.5mm and diameter of 2.1mm. This reed switch has a rated power 10 W, Switching voltage 1,000 VDC, Switching current 0.7 Amp DC. Most used, flat leads.
Miniature MK23-35 surface mount reed switch with glass length of 10.5mm and diameter of 2.1mm. Rated power 20 W, Switching voltage 200 VDC, Switching current 1 Amp DC. The MK23-35 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The KSK-1A31 series reed switch is a mercury wetted miniature high power and high current switch. Featuring a glass length of 11.0mm and diameter of 2.5mm. Rated power 50 W, Switching voltage 500 VDC, Switching current 2 Amp DC.
Miniature MK23-46 surface mount reed switch with glass length of 12.0mm and diameter of 2.0mm. Rated power 10 W, switching voltage 200 VDC, switching current 0.5 Amp DC. The MK23-46 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The GP501 series reed switch is a miniature reed switch featuring a glass length of 12.7mm and diameter of 2.3mm. Rated power 10 W, Switching voltage 200 VDC, Switching current 0.5 Amp DC/AC. Most used.
Product Discontinuation: The GR501 Series Reed Switch is now discontinued and can be directly replaced by the GP501 Series Reed Switch
The KSK-1E66 is a high automotive grade miniature reed switch featuring latching or bistable reed switch contacts. Glass length of 14.0mm and diameter of 2.2mm. This reed switch has a rated power 10 W, Switching voltage 200 VDC, Switching current 0.5 Amp DC. Most used, UL approval.
Miniature MK23-66 surface mount reed switch with glass length of 14mm and diameter of 2.2mm. Rated power 10 W, switching voltage 200 VDC, switching current 0.5 Amp DC. The MK23-66 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The miniature GP560 series reed switch is a high stability switch featuring a glass length of 14.2mm and diameter of 2.3mm. Rated power 10 W, Switching voltage 200 VDC, Switching current 1 Amp DC/AC. Most used.
Product Discontinuation: The GR560 Series Reed Switch is now discontinued and can be directly replaced by the GP560 Series Reed Switch
The KSK-1C90F series reed switch is a miniature (Form C) changeover reed switch or also referred to as single pole double throw (SPDT). Glass length of 14.0mm and diameter of 2.54mm. Rated power 10 W, Switching voltage 175 VDC, Switching current 0.5 Amp DC. N.C. lead has a dog leg bend. UL approval.
The MK23-90 surface mount reed switch is a (Form C) changeover or single pole double throw SPDT miniature (SMD) surface mount reed switch with glass length of 14mm and diameter of 2.54mm. Rated power 10 W, switching voltage 175 VDC, switching current 0.5 Amp DC. The MK23-90 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
A latching reed switch is an ideal solution in extremely low power requirements, particularly in battery powered devices. It is also referred to a or bi-stable (1 Form E) reed switch. Latching reed switches use two permanent magnets to achieve the latching function. The first magnet is partially magnetized. Bringing the contacts closer together, but they still remain open. The second magnet with an aiding field brought close to the switch will close the contacts. And they will remain closed until the second magnet is brought close but this time with a reversed magnetic field. So a latching reed switch can exist in either the normally open (N.O.) or normally closed (N.C.) contact state. And the contact state is controlled by reversing the magnetic field of the second magnet.
The KSK-1E66 is a high automotive grade miniature reed switch featuring latching or bistable reed switch contacts. Glass length of 14.0mm and diameter of 2.2mm. This reed switch has a rated power 10 W, Switching voltage 200 VDC, Switching current 0.5 Amp DC. Most used, UL approval.
The KSK-1E85 series reed switch is a high power and high voltage reed switch with a latching or bistable (Form E) contact configuration. Glass length of 21.0mm and diameter of 2.75mm. Rated power 100 W, Switching voltage 350 VDC, Switching current 1 Amp DC. UL approval.
The Reed Switch ORT651 has a glass length of 14.0mm and diameter of 2.54mm. This ultra-miniature two-contact reed switch is designed for changeover type operation under 30V with a rated power of 3 W and switching current 0.2 Amp DC. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. Most used.
The KSK-1C90F series reed switch is a miniature (Form C) changeover reed switch or also referred to as single pole double throw (SPDT). Glass length of 14.0mm and diameter of 2.54mm. Rated power 10 W, Switching voltage 175 VDC, Switching current 0.5 Amp DC. N.C. lead has a dog leg bend. UL approval.
The MK23-90 surface mount reed switch is a (Form C) changeover or single pole double throw SPDT miniature (SMD) surface mount reed switch with glass length of 14mm and diameter of 2.54mm. Rated power 10 W, switching voltage 175 VDC, switching current 0.5 Amp DC. The MK23-90 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The KSK-1C10 series reed switch is a high power and current changeover reed switch. A changeover switch is also referred to as single pole double throw (SPDT) reed switch. Glass length of 34.3mm and diameter of 5.16mm. Rated power 100 W, Switching voltage 500 VDC, Switching current 3 Amp DC.
High frequency reed switch products are used to switch high frequencies in a many RF applications. Some uses include computers and laptops, digital components in cellphones and phone systems. Others are used extensively in functional PCB test equipment. Examples include integrated circuit (IC) testers, digital component and asic testers, and more. We package these switches into high frequency reed relays for durability and high-density PCB mounting. Our RF reed relays can switch and carry high frequency signals from DC up to 7 GHz. Their nickel/iron switch leads have a relatively high permeability or µ (Mu) resulting in high performance.
Moreover, Reed switch relays are very linear over a large span of frequencies. In fact, they are ideal when switching low level RF loads. Furthermore, reed relays are much smaller than electromechanical relays and comparable to semiconductor types.
Check out some of our popular RF series such as the ultraminiature CRF Reed Relay supplied in tape and reel. Also, the miniature MS Series and SIL RF Series reed relays are great options for switching 1 GHz signals. Internal shielding ensures no electromagnetic interference when closely stacking the relays.
Finally, don't see what your looking for? Reach out to our experts to assist you with your high frequency design. Send us your requirements!
The KSK-1A53 series reed switch is designed for high frequency switching with a glass length of 20.5mm and diameter of 2.8mm. This high frequency reed switch has a rated power 10 W, Switching voltage 200 VDC, Switching current 1 Amp DC.
The KSK-1A54 series reed switch is a high frequency reed switch with glass length of 53.4mm and diameter of 5.4mm. This high frequency reed switch has a rated power 25 W, Switching voltage 500 VDC, Switching current 1.5 Amp DC.
We offer many high power reed switch series for switching up to 120 Watts. Ranging in size from 14mm and up, including some surface mount series. High power switches can be used for proximity, position, motion, and end-limit sensing. Or additionally can be packaged as high power reed relays for quick PCB surface or thru-hole mounting. Relay packaging also provides durability and easy pick and place assembly.
Check out some of our popular high power reed relays! We offer some unique surface mount and through hole relays for switching up to 1,000 VDC. Our newest and smallest SMD relays is the MHV series. Then our most versatile series, the KT reed relay comes in SMD and thru-hole versions. Moreover, the KT relay combines high voltage and power switching with high insulation resistance of >10^13 Ohms. Then there’s the SHV and LI series with similar performance to the KT relay in different pin-out styles. Finally, our most versatile BE series can contain up to 8 internal switches and many contact configurations.
In summary, high power relays and switches are well suited in automotive and test and measurement (ATE) applications. Especially where high power and high voltage requirements exist. Let us assist you in selecting a bare reed switch or one of our high power relay series. Still don’t find what your looking for? Contact us and we’ll be happy to assist you in designing a custom solution that meets your needs precisely.
The KSK-1A31 series reed switch is a mercury wetted miniature high power and high current switch. Featuring a glass length of 11.0mm and diameter of 2.5mm. Rated power 50 W, Switching voltage 500 VDC, Switching current 2 Amp DC.
The KSK-1A55 series reed switch is a high power reed switch with glass length of 16.5mm and diameter of 2.8mm. This reed switch has a rated power 50 W, Switching voltage 100 VDC, Switching current 0.5 Amp DC.
The KSK-1A83 series reed switch is capable of switching high current up to 3 Amp DC and high voltage switching up to 7,500 VDC. Glass length of 53.4mm and diameter of 5.4mm. Rated power 50 W, Switching voltage 7,500 VDC, Switching current 3 Amp DC. Flat leads.
The KSK-1A52 series reed switch is a high breakdown voltage reed switch with glass length of 21.0mm and diameter of 2.75mm. Rated power 50 W, Switching voltage 350 VDC, Switching current 0.5 Amp DC.
The MK23-52 surface mount reed switch is a high breakdown voltage reed switch with a glass length of 21mm and diameter of 2.75mm. Rated power 50 W, switching voltage 350 VDC, switching current 0.5 Amp DC. The MK23-52 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The KSK-1B85 series reed switch is vacuum high power and high voltage reed switch with normally closed (Form B) contacts. Glass length of 21.0mm and diameter of 2.75mm. Rated power 100 W, Switching voltage 350 VDC, Switching current 1 Amp DC. UL approval.
The KSK-1E85 series reed switch is a high power and high voltage reed switch with a latching or bistable (Form E) contact configuration. Glass length of 21.0mm and diameter of 2.75mm. Rated power 100 W, Switching voltage 350 VDC, Switching current 1 Amp DC. UL approval.
The MK23-85 surface mount reed switch is a vacuum high power switch capable of switching high voltages up to 1,000 VDC. Also this series features a glass length of just 21mm and diameter of 2.75mm. Its rated power is 100 W, switching voltage 1,000 VDC, and switching current 1 Amp DC. The MK23-85 SMD reed switch is a bare glass version of our surface mount reed sensors. These bare glass versions offer a more economic and compact design as compared to our over-molded reed sensors. And they are sold in Tape & Reel packing (according to IEC 286/part 3) suitable for pick and place automation.
The KSK-1A33 series reed switch is a high power reed switch and high voltage reed switch with high current capability. Glass length of 52.0mm and diameter of 5.4mm. Rated power 50 W, Switching voltage 250 VDC, Switching current 3 Amp DC.
The KSK-1C10 series reed switch is a high power and current changeover reed switch. A changeover switch is also referred to as single pole double throw (SPDT) reed switch. Glass length of 34.3mm and diameter of 5.16mm. Rated power 100 W, Switching voltage 500 VDC, Switching current 3 Amp DC.
The KSK-1A69 series reed switch is capable of switching high current up to 3 Amp DC as well as high voltage switching up to 10,000 VDC. Glass length of 53.4mm and diameter of 5.4mm. Rated power 50 W, Switching voltage 10,000 VDC, Switching current 3 Amp DC. Flat leads.
We offer many high voltage reed switch series used in high voltage switching applications. Our high voltage reed switches can switch as high as 10,000 VDC and breakdown voltages up to 15,000 VDC. Additionally, can carry continuous currents up to 15 Amps and pulsed currents to 30 Amps.
Furthermore, our high voltage series range from 14mm and up, come in SMD and many other switching options. High voltage switches can be used for proximity, position, motion, and end-limit sensing. We also package these switches as high voltage reed relays for PCB surface or thru-hole mounting. Relay packaging also provides durability and easy pick and place assembly.
Check out some of our popular high voltage reed relays! Our H, HE, and HM series offer the highest switching up to 10 kVDC. And come in various package sizes for PCB mount, thru-hole and free-standing applications with optional direct wiring leads.
We offer some unique surface mount and through hole relays for switching up to 1,000 VDC. Our newest and smallest SMD relays is the MHV series. Then our most versatile series, the KT reed relay comes in SMD and thru-hole versions. Moreover, the KT relay combines high voltage and power switching with high insulation resistance of >10^13 Ohms. Then there’s the SHV and LI series with similar performance to the KT relay in different pin-out styles. Finally, our most versatile BE series can contain up to 8 internal switches and many contact configurations.
In summary, high voltage relays and switches are ideally used in photovoltaic systems, medical and test and measurement (ATE) equipment. Especially where high voltage requirements exist. Let us assist you in selecting a bare reed switch or one of our high voltage relay series. Still don’t find what you're looking for? Contact us and we’ll be happy to assist you in designing a custom solution that meets your needs precisely.
The KSK-1A35/1 Series Reed Switch is a miniature high voltage reed switch with glass length of 10.5mm and diameter of 2.1mm. This reed switch has a rated power 10 W, Switching voltage 1,000 VDC, Switching current 0.7 Amp DC. Most used, flat leads.
The KSK-1A83 series reed switch is capable of switching high current up to 3 Amp DC and high voltage switching up to 7,500 VDC. Glass length of 53.4mm and diameter of 5.4mm. Rated power 50 W, Switching voltage 7,500 VDC, Switching current 3 Amp DC. Flat leads.
The KSK-1B85 series reed switch is vacuum high power and high voltage reed switch with normally closed (Form B) contacts. Glass length of 21.0mm and diameter of 2.75mm. Rated power 100 W, Switching voltage 350 VDC, Switching current 1 Amp DC. UL approval.
The KSK-1E85 series reed switch is a high power and high voltage reed switch with a latching or bistable (Form E) contact configuration. Glass length of 21.0mm and diameter of 2.75mm. Rated power 100 W, Switching voltage 350 VDC, Switching current 1 Amp DC. UL approval.
The MK23-85 surface mount reed switch is a vacuum high power switch capable of switching high voltages up to 1,000 VDC. Also this series features a glass length of just 21mm and diameter of 2.75mm. Its rated power is 100 W, switching voltage 1,000 VDC, and switching current 1 Amp DC. The MK23-85 SMD reed switch is a bare glass version of our surface mount reed sensors. These bare glass versions offer a more economic and compact design as compared to our over-molded reed sensors. And they are sold in Tape & Reel packing (according to IEC 286/part 3) suitable for pick and place automation.
The KSK-1A33 series reed switch is a high power reed switch and high voltage reed switch with high current capability. Glass length of 52.0mm and diameter of 5.4mm. Rated power 50 W, Switching voltage 250 VDC, Switching current 3 Amp DC.
The KSK-1A69 series reed switch is capable of switching high current up to 3 Amp DC as well as high voltage switching up to 10,000 VDC. Glass length of 53.4mm and diameter of 5.4mm. Rated power 50 W, Switching voltage 10,000 VDC, Switching current 3 Amp DC. Flat leads.
Need a KOFU Reed Switch (Formerly OKI) – Standex Electronics is your preferred source worldwide! Check out some of our most utilized KOFU reed switch series ORD211, ORD213, ORD219, ORD228VL, ORD311, ORD312, and ORD324. KOFU reed switches have extremely high quality due to their proprietary manufacturing technologies. Such as contact surface deactivation treatment, high-performance automatic sealing, and contact resistance measurement based on the flux scanning (FS) system. KOFU’s broad product line allows the customer to select a product to suit the intended application and purpose, for everything from low-voltage signal lines to high-voltage power lines. And since we are the global reed switch experts that means we specialize in custom and value-add services. Standex has the expertise and specialized equipment to ensure the highest quality during the custom reed switch manufacturing process.
Reed Switch ORD613 has a glass length of 7.0mm and diameter of 1.8mm. This super ultra-miniature single-contact reed switch is designed for general control of low-level loads under 30V with a rated power of 3 W and switching current 0.2 Amp DC. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. This ultraminiature reed switch is one of our most widely used switches. It features a close differential between the open and closure values or what is referred to as a narrow hysteresis. This is key in achieving a precise switching point as with small portable devices.
The Reed Switch ORT651 has a glass length of 14.0mm and diameter of 2.54mm. This ultra-miniature two-contact reed switch is designed for changeover type operation under 30V with a rated power of 3 W and switching current 0.2 Amp DC. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. Most used.
The MK33-66 surface mount reed switch is a bare glass sensor engineered with a new lead design, providing stability and optimum coplanarity. The unique barrel lead design provides superb solderability and self-alignment to the pads for easy pick and place. The MK33-66 is an ultraminiature 14mm automotive-grade version is capable of switching 200 VDC. Featuring an extremely low-profile construction, ideal for applications requiring small footprint in printed circuit board (PCB) assemblies. TheMK33-66 SMD series tiny footprint allows it to be mounted in a tight reed switch ladder array, for multi-point and continuous liquid level monitoring applications. Supplied in tape and reel according to IEC 60286- 3.
Reed Switch ORD213 has a glass length of 7.0mm and diameter of 1.8mm. And a rated power of 1 W, switching voltage 24 VDC, and switching current 0.1 Amp DC. This ultraminiature reed switch is one of our most widely used switches. It features a close differential between the open and closure values or what is referred to as a narrow hysteresis. This is key in achieving a precise switching point as with small portable devices.
The MK33-66 surface mount reed switch is a bare glass sensor engineered with a new lead design, providing stability and optimum coplanarity. The unique barrel lead design provides superb solderability and self-alignment to the pads for easy pick and place. The MK33-66 is an ultraminiature 14mm automotive-grade version is capable of switching 200 VDC. Featuring an extremely low-profile construction, ideal for applications requiring small footprint in printed circuit board (PCB) assemblies. TheMK33-66 SMD series tiny footprint allows it to be mounted in a tight reed switch ladder array, for multi-point and continuous liquid level monitoring applications. Supplied in tape and reel according to IEC 60286- 3.
The MK33-87 surface mount reed switch is a bare glass sensor engineered with a new lead design, providing stability and optimum coplanarity. The unique barrel lead design provides superb solderability and self-alignment to the pads for easy pick and place. The MK33-87 is an ultraminiature 10mm version is capable of switching 200 VDC. Featuring an extremely low-profile construction, ideal for applications requiring small footprint in printed circuit board (PCB) assemblies. TheMK33-87 SMD series tiny footprint allows it to be mounted in a tight reed switch ladder array, for multi-point and continuous liquid level monitoring applications. Supplied in tape and reel according to IEC 60286- 3.
Ultraminiature MK23-80 surface mount reed switch with glass length of 7mm and diameter of 1.8mm. Rated power 10 W, switching voltage 170 VDC, switching current 0.5 Amp DC. The MK23-80 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
Miniature MK23-35 surface mount reed switch with glass length of 10.5mm and diameter of 2.1mm. Rated power 20 W, Switching voltage 200 VDC, Switching current 1 Amp DC. The MK23-35 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
Miniature MK23-46 surface mount reed switch with glass length of 12.0mm and diameter of 2.0mm. Rated power 10 W, switching voltage 200 VDC, switching current 0.5 Amp DC. The MK23-46 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
Miniature MK23-66 surface mount reed switch with glass length of 14mm and diameter of 2.2mm. Rated power 10 W, switching voltage 200 VDC, switching current 0.5 Amp DC. The MK23-66 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The MK23-90 surface mount reed switch is a (Form C) changeover or single pole double throw SPDT miniature (SMD) surface mount reed switch with glass length of 14mm and diameter of 2.54mm. Rated power 10 W, switching voltage 175 VDC, switching current 0.5 Amp DC. The MK23-90 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The MK23-52 surface mount reed switch is a high breakdown voltage reed switch with a glass length of 21mm and diameter of 2.75mm. Rated power 50 W, switching voltage 350 VDC, switching current 0.5 Amp DC. The MK23-52 surface mount reed switch is a bare glass version of our surface mount reed sensors, offering a more economic and compact design as compared to our over-molded reed sensors. Sold in Tape & Reel packing according to IEC 286/part 3 and is suitable for pick and place automation.
The MK23-85 surface mount reed switch is a vacuum high power switch capable of switching high voltages up to 1,000 VDC. Also this series features a glass length of just 21mm and diameter of 2.75mm. Its rated power is 100 W, switching voltage 1,000 VDC, and switching current 1 Amp DC. The MK23-85 SMD reed switch is a bare glass version of our surface mount reed sensors. These bare glass versions offer a more economic and compact design as compared to our over-molded reed sensors. And they are sold in Tape & Reel packing (according to IEC 286/part 3) suitable for pick and place automation.
® Copyright 2025 Standex Electronics, Inc. ® All Rights Reserved. A Standex International Corporation Company.