The S12-275VPD-RGP21 Hall Effect Metal Detection Sensor is a digital proximity sensor. “DP” type Hall Effect Sensors are digital proximity sensors that detect large steel or ferrous targets. The programmed detection gap is set to 0.375″ which is dependent upon the shape, size, and ferrous content. The Proximity Sensor turns on when the ferrous metal is detected, producing a low digital output. Conversely, when the ferrous metal moves outside the detection gap, the sensor turns off producing a high digital output. Use the provided lock nuts to set the air gap from the target.
The S12-275VPD-RGP21 Sensor has a regulated input and 0-5 V digital output. Furthermore, the sensor is potted in a stainless steel M12 cylindrical housing with integrated connector.
DP Ferrous Metal Detection Sensors can be programmed for repeatable and precise target detection. Contact us with your specific requirements!
Other features include:
| Output Type | Digital 0 to 5 V |
| Actuator Material | Ferrous Metals |
| Frequency | 500 Hz |
| Supply Voltage, Vcc | 8 ~ 30 V |
| Operating Temp. | -40 ~ 110 C |
| Package/Case | Cylinder, Threaded M12 |
| Termination Style | Wire Leads |
Aerospace, Agricultural, Automotive/Heavy Equipment, Consumer Electronics, Manufacturing, Marine, Medical, Military, Power Generation, Transportation
Series Data Sheet (PDF)
| Item No. | Datasheet | Distributor | Region | Quantity | Cart | RFQ | Inventory Date |
|---|---|---|---|---|---|---|---|
| S12-275VPD-RGP21 | MASTER/ONLINE | Americas | 0 | RFQ | 2023-08-01 | ||
| S12-275VPD-RGP21 | Heilind Electronics | Americas | 10 | BUY | RFQ | 2023-08-01 | |
| S12-275VPD-RGP21 | Digi-Key Electronics | Americas | 5 | BUY | RFQ | 2023-08-01 | |
| S12-275VPD-RGP21 | Standex Factory | Americas | 0 | RFQ | 2024-04-23 | ||
| S12-275VPD-RGP21 | Mouser Electronics | Americas | 10 | BUY | RFQ | 2024-04-23 | |
| S12-275VPD-RGP21 | Arrow Electronics | Americas | 10 | BUY | RFQ | 2024-04-23 | |
| S12-275VPD-RGP21 | TTI Inc Global Headquarters | Americas | 0 | RFQ | 2024-04-23 |
| Mounting Style | Function Type | Sensing Range - On / Off (Gauss) | Voltage Supply (VDC) | Current Supply (mA) | Output Leakage Current Max. (μA) | Output On Voltage Typ. (mV) | Chopping Frequency Typ. (KHz) | Operating Temperature (°C) | Cable Length (mm) |
|---|---|---|---|---|---|---|---|---|---|
The S12-275VPD-5VCB2 Hall Effect Metal Detection Sensor is a digital proximity sensor. “DP” type Hall Effect Sensors are digital proximity sensors that detect large steel or ferrous targets. The programmed detection gap is set to 0.375″ which is dependent upon the shape, size, and ferrous content. The Proximity Sensor turns on when the ferrous metal is detected, producing a low digital output. Conversely, when the ferrous metal moves outside the detection gap, the sensor turns off producing a high digital output. Use the provided lock nuts to set the air gap from the target.
The S12-275VPD-5VCB2 Sensor uses a 0-5 V digital output. Furthermore, the sensor is potted in a stainless steel M12 cylindrical housing with integrated connector.
DP Ferrous Metal Detection Sensors can be programmed for repeatable and precise target detection. Contact us with your specific requirements!
Other features include:
The MFM7-275VPD-RGCD4 Hall Effect Metal Detection Sensor is a digital proximity sensor. “DP” type Hall Effect Sensors are digital proximity sensors that detect large steel or ferrous targets. The programmed detection gap is set to 0.375″ which is dependent upon the shape, size, and ferrous content. The Proximity Sensor turns on when the ferrous metal is detected, producing a low digital output. Conversely, when the ferrous metal moves outside the detection gap, the sensor turns off producing a high digital output. Use the provided lock nuts to set the air gap from the target.
The MFM7-275VPD-RGCD4 Sensor has a regulated input and 0-5 V digital output. Furthermore, the sensor is potted in a plastic flange mount housing with Deutsch DT04 4-pin connector with 5″ 20 AWG XLPE wire.
DP Ferrous Metal Detection Sensors can be programmed for repeatable and precise target detection. Contact us with your specific requirements!
Other features include:
The S18-275VPD-RICB1E Hall Effect Metal Detection Sensor is a digital proximity sensor. “DP” type Hall Effect Sensors are digital proximity sensors that detect large steel or ferrous targets. The programmed detection gap is set to 0.375″ which is dependent upon the shape, size, and ferrous content. The Proximity Sensor turns on when the ferrous metal is detected, producing a low digital output. Conversely, when the ferrous metal moves outside the detection gap, the sensor turns off producing a high digital output. Use the provided lock nuts to set the air gap from the target.
The S18-275VPD-RICB1E Sensor has a regulated input and PNP output. Furthermore, the sensor is potted in a stainless steel M18 cylindrical housing with 4 pin male micro connector on an 11″ jacketed pur cable.
DP Ferrous Metal Detection Sensors can be programmed for repeatable and precise target detection. Contact us with your specific requirements!
Other features include:
The S12H-275VPA-RGCB2 Hall Effect Metal Detection Sensor is an analog proximity sensor. “AP” type Hall Effect Sensors are analog proximity sensors that detect large steel or ferrous targets. The target detection gap is dependent upon the shape, size, and ferrous content. The Proximity Sensor goes from 0.5 V (analog output increases) when no ferrous metal is detected to 4.5 V (analog output decreases) when contacting the steel plate. Use the provided lock nuts to set the air gap from the target.
The S12H-275VPA-RGCB2 Sensor uses a regulated input and 0-5 V analog output. Furthermore, the sensor is potted in a stainless steel M12 cylindrical housing with integrated connector.
AP Ferrous Metal Detection Sensors can be programmed for repeatable and precise target detection. Contact us with your specific requirements!
Other features include:
Welcome to Standex Electronics' How to Select the Correct Technology for a Given Sensor Requirement. We will focus on the following sensor technologies - Reed, Hall, and Electromechanical. These sensors all provide a switching function either directly or indirectly. We will introduce the key specifications, and how these parameters compare to each other for the different technologies.
® Copyright 2024 Standex Electronics, Inc. ® All Rights Reserved. A Standex International Corporation Company.
