Contact Us
Contact Us Stock Check

S38J-22ADSO-5KJA5 Hall Effect Gear Tooth Sensor

Description

The S38J-22ADSO-5KJA5 Hall Effect Gear Tooth Sensor is a tiny dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets to resolve speed or count. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The S38J-22ADSO-5KJA5 Sensor uses NPN output with a 5k pull up resistor. Furthermore, the sensor is potted in a stainless steel cylindrical threaded housing with jacketed 3 wire 22AWG 80C PVC.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. The S38J-22ADSO-5KJA5 sensor operates in the presence of a magnetic field, which causes the NPN output to go high. 

Other features include:

  • Internal hysteresis, bounce free
  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

Specifications

Output TypeNPN
Actuator MaterialFerrous Metals, Gear Tooth
Frequency15 kHz
Supply Voltage, Vcc4.2 ~ 24 V
Operating Temp.-40 ~ 110 C
Package/CaseStainless Steel Cylinder, Threaded
Termination StyleJacketed 3 Wire

Applications

Aerospace, Agricultural, Automotive/Heavy Equipment, Consumer Electronics, Manufacturing, Marine, Medical, Military, Power Generation, Transportation

Series Data Sheet (PDF)
 
Print

Stock Check

Item No.DatasheetDistributorRegionQuantityCartRFQInventory Date
S38J-22ADSO-5KJA5 MASTER/ONLINEAmericas0 RFQ2024-12-08
S38J-22ADSO-5KJA5 Digi-Key ElectronicsAmericas8 BUY RFQ2024-12-08
S38J-22ADSO-5KJA5 Standex FactoryAmericas0 RFQ2024-12-08
S38J-22ADSO-5KJA5 Mouser ElectronicsAmericas0 RFQ2024-12-08
S38J-22ADSO-5KJA5 Arrow ElectronicsAmericas9 BUY RFQ2024-12-08

Parametric Search

Mounting StyleFunction TypeSensing Range - On / Off (Gauss)Voltage Supply (VDC)Current Supply (mA)Output Leakage Current Max. (μA)Output On Voltage Typ. (mV)Chopping Frequency Typ. (KHz)Operating Temperature (°C)Cable Length (mm)
Part Number Mounting StyleFunction TypeSensing Range - On / Off (Gauss)Voltage Supply (VDC)Current Supply (mA)Output Leakage Current Max. (μA)Output On Voltage Typ. (mV)Chopping Frequency Typ. (KHz)Operating Temperature (°C)Cable Length (mm)
S38J-22ADSO-5KJA5Cylinder, Threaded, 3/8-24Gear Tooth Speed Sensor4.5 ~ 280NPN0Ferrous Metals-40 ~ 1100

Associated Parts

The A44-18ADSO-P5P21 Hall Effect Gear Tooth Sensor is a dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The A44-18ADSO-P5P21 Sensor uses PNP output with a 5k resistor.  Furthermore, the sensor is potted in a black anodized aluminum barrel housing with free end wire leads.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. Lock nuts are used to set the air gap within the rage of the sensing target. The A44-18ADSO-P5P21 sensor operates in the presence of a magnetic field, which causes the PNP output to go high. 

Other features include:

  • Internal hysteresis, bounce free
  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

The S12-18ADSO-5KCB2 Hall Effect Gear Tooth Sensor is a dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The S12-18ADSO-5KCB2 Sensor uses NPN output with a 5k pull up resistor.  Furthermore, the sensor is potted in a stainless steel M12 cylindrical housing with integrated connector.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. Lock nuts are used to set the air gap within the rage of the sensing target. The S12-18ADSO-5KCB2 sensor operates in the presence of a magnetic field, which causes the NPN output to go low. 

Other features include:

  • Internal hysteresis, bounce free
  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

The MFM7-37ADSO-L5CD3 Hall Effect Gear Tooth Sensor is a large dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The MFM7-37ADSO-L5CD3 Sensor uses load dump and EMI protected input and NPN output with a 5k pull up resistor.  Furthermore, the sensor is potted in a plastic flange mount housing with wire leads and Deutsch DT 3 pin connector.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. Set the air gap relative to the sensing target face with the easy install flange mount design. The MFM7-37ADSO-L5CD3 sensor operates in the presence of a magnetic field, which causes the NPN output to go low. 

Other features include:

  • Greater air gap range
  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

The MFM61O-18ADSO-L5CP13 Hall Effect Gear Tooth Sensor is a dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The MFM61O-18ADSO-L5CP13 Sensor uses surge protected input and NPN output with a 5k pull up resistor.  Furthermore, the sensor is potted in a plastic flange mount housing with integrated 3-way Metri-Pack male connector.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. Set the air gap relative to the sensing target face with the easy install flange mount design. The MFM61O-18ADSO-L5CP13 sensor operates in the presence of a magnetic field, which causes the NPN output to go low. 

Other features include:

  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

The MFM7-37ADSO-L5CP13 Hall Effect Gear Tooth Sensor is a large dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The MFM7-37ADSO-L5CP13 Sensor uses load dump and EMI protected input and NPN output with a 5k pull up resistor.  Furthermore, the sensor is potted in a plastic flange mount housing with wire leads and Deutsch DT 3 pin connector.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. Set the air gap relative to the sensing target face with the easy install flange mount design. The MFM7-37ADSO-L5CP13 sensor operates in the presence of a magnetic field, which causes the NPN output to go low. 

Other features include:

  • Internal hysteresis, bounce free
  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

The MFM7-37ADSO-P5P21 Hall Effect Gear Tooth Sensor is a large dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The MFM7-37ADSO-P5P21 Sensor uses PNP output with a 5k resistor. Furthermore, the sensor is potted in a plastic flange mount housing with free end wire leads.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. Set the air gap relative to the sensing target face with the easy install flange mount design. The MFM7-37ADSO-P5P21 sensor operates in the presence of a magnetic field, which causes the PNP output to go high. 

Other features include:

  • Internal hysteresis, bounce free
  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

The A63-37ADSO-5KJA5 Hall Effect Gear Tooth Sensor is a dynamic speed sensor. “DSO” type Hall Effect Sensors are digital single square wave output target trackers that detect 0-32 pitch gears and ferrous targets. Additional targets include ferrous bolt heads, holes in steel plates, and other magnetic targets.

The A63-37ADSO-5KJA5 Sensor uses NPN output with a 5k resistor. Furthermore, the sensor is potted in a plastic black anodized aluminum threaded housing with jacketed 3 wire 22AWG 80C PVC.

DSO Gear Tooth Sensors have a self-calibrating output that reacts to both the leading and falling edge of any ferrous metal target. No rotational orientation is required for the sensor to operate. The A63-37ADSO-5KJA5 sensor operates in the presence of a magnetic field, which causes the NPN output to go high. 

Other features include:

  • Internal hysteresis, bounce free
  • Solid state (no wearing parts)
  • Temperature stable
  • Near 0 speed operation
  • Dynamic, self-adjusting

Technical Papers

Datasheets
Datasheet – RM-01-071 Magnet for Position and Speed SensorsDatasheet – RM-01-020 Magnet for Position and Speed SensorsDatasheet – PM-SCS50Fx075S-01022S Magnet in Bolt CasingDatasheet – PM-SCS50Fx075S-01022N Magnet in Bolt CasingDatasheet – AM-M1H2-04022 Magnet for Angle Position SensorDatasheet – MFM7-AH5-5VP21 Analog Hall Effect Switch SensorDatasheet – S12-AH5-5VP21 Analog Hall Effect Switch SensorDatasheet – M12-HS1-5KP21 Hall Effect Switch SensorDatasheet – S12R-SSRHS1-NOSL5-001 Hall Effect Switch Speed SensorDatasheet – S12R-SSRDSO-NOSL5-001 Hall Effect Gear Tooth Speed SwitchDatasheet – A47-18ADSO-ODP21 Hall Effect Gear Tooth SensorDatasheet – A12F-18ADSO-ODP23 Hall Effect Gear Tooth SensorDatasheet – S38J-22ADSO-5KJA5 Hall Effect Gear Tooth SensorDatasheet – A63-37ADSO-5KJA5 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-P5P21 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-ODX0B Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-LNCP13 Hall Effect Gear Tooth SensorDatasheet – MFM7-APS90-LACD4 Hall Effect Angle Position SensorDatasheet – MFM7-APS180-LACD4 Hall Effect Angle Position SensorDatasheet – MFM7-APS360-LACD4 Hall Effect Angle Position SensorDatasheet – A63-APS360-LACB1E Hall Effect Angle Position SensorDatasheet – S63B-DHS1-5KCB2A Hall Effect Dual Switch SensorDatasheet – MFM7-DHS1-5KCD4 Hall Effect Dual Switch SensorDatasheet – S12-DHS1-5KSA5 Hall Effect Dual Switch SensorDatasheet – M12-HS1-5KCB2 Hall Effect Switch SensorDatasheet – A47-HS1-P5P21 Hall Effect Switch SensorDatasheet – A47-HS1-5KP21 Hall Effect Switch SensorDatasheet – S38-HS1-5KP21 Hall Effect Switch SensorDatasheet – S12H-275VPA-RGCB2 Hall Effect Metal Detection SensorDatasheet – MFM7-275VPD-RGCD4 Hall Effect Metal Detection SensorDatasheet – S18-275VPD-RICB1E Hall Effect Metal Detection SensorDatasheet – S12-275VPD-5VCB2 Hall Effect Metal Detection SensorDatasheet – S12-275VPD-RGP21 Hall Effect Metal Detection SensorDatasheet – S18-SSTHS1-R5SA5-30 Hall Effect Magnet Speed SwitchDatasheet – S12R-SSRDSO-NOSL5-500 Hall Effect Gear Tooth Speed SwitchDatasheet – S12R-SSRDSO-NCSL5-001 Hall Effect Gear Tooth Speed SwitchDatasheet – S12H-SSTDSO-R5CB2-500 Hall Effect Gear Tooth Speed SwitchDatasheet – S12H-SSTDSO-R5CB2-001 Hall Effect Gear Tooth Speed SwitchDatasheet – A44-18ADSO-P5P21 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-L5CP13 Hall Effect Gear Tooth SensorDatasheet – MFM7-37ADSO-L5CD3 Hall Effect Gear Tooth SensorDatasheet – MFM61O-18ADSO-L5CP13 Hall Effect Gear Tooth SensorDatasheet – S12-18ADSO-5KCB2 Hall Effect Gear Tooth Sensor

Applications

Media

Product Training Module – Reed Sensor vs. Hall & Mechanical

Welcome to Standex Electronics' How to Select the Correct Technology for a Given Sensor Requirement. We will focus on the following sensor technologies - Reed, Hall, and Electromechanical. These sensors all provide a switching function either directly or indirectly. We will introduce the key specifications, and how these parameters compare to each other for the different technologies.

SUBSCRIBE TO OUR NEWSLETTER

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials.

  • This field is hidden when viewing the form

Tradeshows & Events

electronica 2024
Time: November 12- 15, 2024
Place: Messe Munich
Booth No.: 331
For More Details, Click Here.

Follow Us

Focused. Leadership

Video
Download Table
Products compare