Contact Us
Contact Us Stock Check

TRP-TRPD Series Low Voltage Rectifier Transformers

Description

TRP-TRPD Series Low Voltage Rectifier Power Transformers are line frequency magnetics designed for printed circuit board (PCB) vertical mounting (TRP series is 6 pin and TRPD series is 8 pin). 0.5VA to 24VA single or dual primary voltages. 6 Pin 230 Volt 50/60Hz also available. CSA and UL recognized LR16597, E105782. Class B – 130°C insulation system. Custom sizes, ratings and terminations may be engineered for your specific application.

Applications

Low frequency

Series Data Sheet (PDF)
 
Print

Associated Parts

FTP Series Class 2 Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted package.  These transformers 2.5VA to 50 VA and dual primary voltage 115/230V 50/60 Hz. 400 VRMS dielectric strength tested. Bobbins and shroud meet UL94 VO rating. Most models use energy limiting fuse-less design. Split/dual bobbin construction provides for low capacitive coupling, minimizing noise. No electrostatic shield necessary. High isolation primary to secondary. Designed to meet CSA C22.2 No. 66 and UL1585. Custom sizes, ratings and terminations may be engineered for your specific application.

TAP Series Telecomm Transformers are audio matching telecommunications line frequency magnetics designed for PC board (PCB) mount and feature an economical open P.C. frame mounting with bifilar winding for capacitive and resistive balance. Frequency response 200Hz to 15KHz and insertion loss less than 1.5 dB. Dielectric tested for 250 VRMS. Custom epoxy cast unit available as well as custom sizes, ratings and terminations may be engineered for your specific application.

TRB Series Low Voltage Rectifier Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted – open style package. CSA certified LR 16597 and UL recognized E105782. Insulated 10″ TEW primary and secondary leads. Secondary winding center tapped. Custom sizes, ratings and terminations may be engineered for your specific application.

TRC Series Low Voltage Rectifier Transformers are line frequency magnetics designed in a chassis mount package – open style. CSA certified LR 16597 and UL recognized E105782. Conservative Class A operation with economical channel frame mounting. Split/dual bobbin operation. All secondaries center tapped Class B – 130°C insulation system used. Custom sizes, ratings and terminations may be engineered for your specific application.

TRPI Series Low Voltage Rectifier Power Transformers are line frequency magnetics designed in a printed circuit board (PCB) mounted package with 2.5VA to 56VA and 4000VRMS isolation primary and secondary. Industry standard P.C. board layout. Dual primary/secondary windings for series/parallel operation. CSA/UL recognized components. Custom sizes, ratings and terminations may be engineered for your specific application.

TRPL Series Power Transformers are line frequency magnetics designed for printed circuit board (PCB) mounting and have low inter-winding capacitance and require no electro-static shield due to separated windings. Dual Primaries 115/230V, 50/60Hz and 2.5VA to48 VA. Industry standard P.C. pin layout. CSA Certified LR 16597; UL recognized E105782. Ideal for solid state control and instrumentation as well as sing or dual output D.C. supplies. Custom sizes, ratings and terminations may be engineered for your specific application.

TRPH Series Horizontal Split Bobbin Power Transformers are line frequency magnetics designed for printed circuit board (PCB) mounting. Split bobbin construction provides for high isolation primary to secondary, low capacitive to minimize line noise, and require no electrostatic shield. Single 115V or dual 115/230V primaries. Split secondaries allow series, parallel or dual operation. CSA certified LR15697 and UL recognized E107872. Class B – 130°C insulation system. Custom sizes, ratings and terminations may be engineered for your specific application.

Technical Papers

Datasheets
Datasheet – Planar Transformer 10kW-100kWDatasheet – TLE TLB FPT Series Low Voltage Lighting TransformersDatasheet – TA-TAE-FPT Series Auto TransformersDatasheet – FPS Series Class 2 TransformersDatasheet – FTA Series Class 2 TransformersDatasheet – CA Series Class 2 TransformersDatasheet – FPT Series Power Toroidal TransformersDatasheet – TRPH Series Horizontal Split Bobbin Power TransformersDatasheet – TRP-TRPD Series Low Voltage Rectifier TransformersDatasheet – TRPL Series Power TransformersDatasheet – TRPI Series Low Voltage Rectifier TransformersDatasheet – TRC Series Low Voltage Rectifier TransformersDatasheet – TRB Series Low Voltage Rectifier TransformersDatasheet – TAP Series Telecomm TransformersDatasheet – FTP Series Class 2 TransformersDatasheet – TRL Series Low Profile TransformerDatasheet – TRE Series Low Voltage Rectifier TransformersDatasheet – TRCQ Series Low Voltage Rectifier TransformersDatasheet – TRCI-TRBI Series Low Voltage Rectifier TransformersDatasheet – TCE Series Control Circuit TransformersDatasheet – TCC-TCK Series Control Circuit Power TransformersDatasheet – TC Series Control Circuit TransformersDatasheet – FTC-FTD-FTK Series Class 2 TransformersDatasheet – CHB-CHC Series ReactorsDatasheet – 400 Hz Power Transformers 1.5 VA to 9 VADatasheet – Scott T TransformersDatasheet – 2mH Switching Regulator InductorsDatasheet – 10mH Switching Regulator InductorsDatasheet – CSB Series High/Low Frequency Current Sense TransformerDatasheet – SJ / SU Series High Frequency Toroidal InductorDatasheet – CM Series High/Low Frequency Toroidal Common Mode ChokeDatasheet – CI CJ Series High Frequency Toroidal Differential Mode InductorDatasheet – SP Series High Frequency Toroidal Power “Chip” InductorDatasheet – ST Series High Frequency Toroidal Power “Chip” InductorDatasheet – Planar Transformer 10W-50WDatasheet – Planar Transformer 20W-150WDatasheet – Planar Transformer 50W-200WDatasheet – Planar Transformer 100W-500WDatasheet – Planar Transformer 150W-700WDatasheet – Planar Transformer 300W-1200W HeatsinkDatasheet – Planar Transformer 300W-1200WDatasheet – Planar Transformer 1kW-3kW HeatsinkDatasheet – Planar Transformer 1kW-3kWDatasheet – Planar Transformer 2kW-6kW HeatsinkDatasheet – Planar Transformer 2kW-6kWDatasheet – Planar Transformer 3kW-10kW HeatsinkDatasheet – Planar Transformer 3kW-10kWDatasheet – Planar Transformer 10kW-20kW HeatsinkDatasheet – Planar Transformer 10kW-20kWDatasheet – Planar Transformer 10kW-30kW

Brochures & Catalogs

Applications

Media

Aerospace Planar Transformer for Switch-Mode Power Supplies

In this Planar Transformer mini case study, we discuss how we partnered with an aerospace customer, delivering a coupled hybrid aerospace solution that integrated a standard planar transformer with an inductor. We solved the customer's challenge of decreasing unit costs while saving design space and improving overall performance with the added benefit of reducing electromagnetic interference (EMI).

A planar transformer, the primary component used in switch-mode power supplies, offers volumetric efficiency and a lower profile over traditional wire-wound transformers because it uses printed circuit boards (PCB) for its turns.

To find out more about how we partner, solve, and deliver solution-based engineering for power magnetics customers, visit our website at https://standexelectronics.com/

Standex Electronics is a global leader in the design, development, and manufacturing of standard and custom planar transformer solutions.

Standex Electronics at AHR Expo 2013

Alex Vinnage talks about what attendees can expect from Standex Electronics at the 2013 AHR Expo.

SUBSCRIBE TO OUR NEWSLETTER

We Will Use The Email Address You Provide To Send You Marketing And Promotional Materials.

Tradeshows & Events

Follow Us

Focused. Leadership

Video
Download Table
Products compare